#include "JIoMapPage.h"
#include <Machine.h>
#include <QJsonObject>

JIoMapPage::JIoMapPage() {}

QWidget* JIoMapPage::CreateIoPage(const CONFIG_BASE_STRUCT& control)
{
    // 1.用到表中的变量
    QString strName = control.strName.c_str();

    // 2. 创建垂直布局
    QHBoxLayout* pHLayout = new QHBoxLayout();

    IoStateLab* pIoState = new IoStateLab();
    pIoState->setIoName(strName);
    QLabel* pAxisNmae = new QLabel();
    QString strAxisName = tr("AxisNmae:", "轴名称:");
    strAxisName += strName;
    pAxisNmae->setText(strAxisName);

    //QLabel* pLow = new QLabel();
    //pLow->setText(tr("Voltage status", "电压状态"));
    //QComboBox* pComBox = new QComboBox();
    //pComBox->addItem(tr("Low", "低电平"));
    //pComBox->addItem(tr("High","高电平"));
    //pComBox->setCurrentIndex(1);
    //// 连接信号和槽
    //connect(pComBox, &QComboBox::currentTextChanged, []() {


    //    });

    // 轴名称
    pHLayout->addWidget(pAxisNmae);

    //// 电平组合
    //pHLayout->addWidget(pLow);
    //pHLayout->addWidget(pComBox);

    // 改变状态标记
    pHLayout->addWidget(pIoState);
    QWidget* pWidget = new QWidget;
    pWidget->setLayout(pHLayout);
    return pWidget;
}

QWidget* JIoMapPage::CreateAxisTestPage(const CONFIG_BASE_STRUCT& control)
{
    // 1.用到表中的变量
    QString strName = control.strName.c_str();

    QHBoxLayout* pHLayout = new QHBoxLayout();
    QLabel* pAxisNmae = new QLabel();
    QString strAxisName = tr("AxisNmae:", "轴名称:");
    strAxisName += strName;
    pAxisNmae->setText(strAxisName);
    pHLayout->addWidget(pAxisNmae);

    QLineEdit* pCardNumberType = new QLineEdit(tr("Card Number Type", "卡号类型"));
    pCardNumberType->setText("0");
    pHLayout->addWidget(pCardNumberType);

    QLineEdit* pCardNumber = new QLineEdit(tr("Card Number", "卡号"));
    pCardNumber->setText("0");
    pHLayout->addWidget(pCardNumberType);

    QPushButton* pTest = new QPushButton(tr("Axis Test","轴测试"));
    QObject::connect(pTest, &QPushButton::clicked, [strName]()
        {
            ns_module::CViewMotion::GetInstance()->ShowMotionAdjustPage(strName.toStdString());
        });

    pHLayout->addWidget(pTest);


    QWidget* pWidget = new QWidget;
    pWidget->setLayout(pHLayout);
    return pWidget;
}

void JIoMapPage::JCreateMenu(QWidget* pWidget)
{
    // 设置上下文菜单策略
    pWidget->setContextMenuPolicy(Qt::CustomContextMenu);
    // 连接信号到槽函数
    connect(pWidget, &QWidget::customContextMenuRequested, [=](const QPoint& pos)
        {
        QMenu menu;
        QAction* pGetAct = menu.addAction(tr("Get","获取"));
        QAction* pSetUpAct = menu.addAction(tr("set up","设置"));
        QAction* pDefValUpAct = menu.addAction(tr("default value", "默认值"));
        // 连接动作的触发信号
        connect(pGetAct, &QAction::triggered, []() { qDebug() << "Get"; });
        connect(pSetUpAct, &QAction::triggered, []() { qDebug() << "set up"; });
        connect(pDefValUpAct, &QAction::triggered, []() { qDebug() << "default value"; });
        // 显示菜单
        menu.exec(pWidget->mapToGlobal(pos));
        });
}

void JIoMapPage::JCreateMenu(QWidget* pWidget, ST_DEFAULT_VAL defaultVal)
{
    pWidget->setContextMenuPolicy(Qt::CustomContextMenu);
    connect(pWidget, &QWidget::customContextMenuRequested, [=](const QPoint& pos)
        {
            QMenu menu;
            QAction* pDefValUpAct = menu.addAction(tr("default value", "默认值"));
            connect(pDefValUpAct, &QAction::triggered, [defaultVal]() 
            {
                    if (!defaultVal.fieldDefult.isEmpty())
                    {
                        defaultVal.lineEdit->setText(defaultVal.fieldDefult);
                    }
            });
            menu.exec(pWidget->mapToGlobal(pos));
        });
}


QLabel* JIoMapPage::JCreateName0(const QString& fieldDescribe, const QString& fieldDescribe_Eng, int nlanguage)
{
    QLabel* pNameLable = new QLabel();
    if (nlanguage == 0)
    {
        pNameLable->setText(fieldDescribe_Eng);
        if (fieldDescribe_Eng.isEmpty())
        {
            pNameLable->setText(fieldDescribe);
        }
    }
    else
    {
        pNameLable->setText(fieldDescribe);
        if (fieldDescribe.isEmpty())
        {
            pNameLable->setText(fieldDescribe_Eng);
        }
    }

    pNameLable->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
    pNameLable->setFixedHeight(24);
    pNameLable->setMinimumWidth(120);

    return pNameLable;
}

AutoResizeLabel* JIoMapPage::JCreateJText(const QString& name)
{
    AutoResizeLabel* pLabel = new AutoResizeLabel();
    pLabel->setText(name);
    pLabel->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
    //pLabel->setFixedHeight(24);
    //pLabel->setMinimumWidth(120);

    return pLabel;
}

QList<ST_DATA_ITEM> JIoMapPage::parseJsonToDataList(const QString& jsonString)
{
    QList<ST_DATA_ITEM> dataList;
    QJsonDocument jsonDoc = QJsonDocument::fromJson(jsonString.toUtf8());

    if (jsonDoc.isNull() || !jsonDoc.isArray())
    {
        qWarning() << "解析失败或JSON不是数组";
        return dataList;
    }

    QJsonArray jsonArray = jsonDoc.array();

    // 遍历数组
    for (const QJsonValue& val : jsonArray) 
    {
        if (val.isObject())
        {
            QJsonObject obj = val.toObject();
            ST_DATA_ITEM item;
            item.key    = obj.value("key").toString();
            item.value  = obj.value("value").toString();
            dataList.append(item);
        }
    }

    return dataList;
}