#include "DbTreeViewManager.h"
#include "OriginalWnd/OriginalWnd.h"
#include "OriginalWnd/NonInteractiveCheckDelegate.h"
#include <QFile>
#include <QTextStream>
#include <QDateTime>
#include "Src/common/JMessageTip.h"
#include "Src/common/JLogAllOutput.h"
#include "CViewInterface.h"

// 构造函数
DbTreeViewManager::DbTreeViewManager(QWidget* pOriginalWndMenuPage, QWidget* parent)
    : QWidget(parent),
    m_pOriginalWndMenuPage(pOriginalWndMenuPage)
{
    m_originalWnd = dynamic_cast<OriginalWnd*>(parent);
    Init();

    // 设置模型
    m_pTreeViewDown->setModel(m_pCModel);
    m_pTreeViewDown->setHeaderHidden(true);
    m_pTreeViewDown->setEditTriggers(QAbstractItemView::NoEditTriggers);

    // 设置树视图的几何位置
    m_pTreeViewDown->setGeometry(16, 106, m_pOriginalWndMenuPage->width() - 16, m_pOriginalWndMenuPage->height() - 106);

    // 安装事件过滤器以自定义绘制虚线
    m_pTreeViewDown->viewport()->installEventFilter(this);

    // 创建统一分隔线
    m_pLineFrame1 = createUnifiedSeparator(m_pOriginalWndMenuPage, 2);
    m_pLineFrame1->setGeometry(16, 100, 460, 2);

    // 创建按钮并设置布局
    setupButton();

    // 创建导航栏
    m_pNavigationWidget = new QWidget(m_pOriginalWndMenuPage);
    m_pNavigationWidget->setGeometry(15, 15, 300, 74);

    // 连接目录前的复选框信号与槽
    connect(m_pCModel, &QStandardItemModel::itemChanged, this, &DbTreeViewManager::onItemChanged);

    // 目录树连接点击信号
    connect(m_pTreeViewDown, &QTreeView::clicked, this, &DbTreeViewManager::onTreeViewClicked);

    // 连接目录 expanded 和 collapsed 信号
    connect(m_pTreeViewDown, &QTreeView::expanded, this, [=](const QModelIndex &index) {
        QStandardItem *item = m_pCModel->itemFromIndex(index);
        if (!item) return;

        QStringList path = buildItemPath(item);
        expandedPaths.insert(path.join("/"));
        updateSeparatorLine();

        // 保存展开路径
        saveExpandedPaths();
    });

    connect(m_pTreeViewDown, &QTreeView::collapsed, this, [=](const QModelIndex &index) {
        QStandardItem *item = m_pCModel->itemFromIndex(index);
        if (!item) return;

        QStringList path = buildItemPath(item);
        expandedPaths.remove(path.join("/"));
        updateSeparatorLine();

        // 保存展开路径
        saveExpandedPaths();
    });



    // 所有展开操作完成后更新分隔线
    QTimer::singleShot(0, this, [=]() {
        QStandardItem *rootItem = m_pCModel->invisibleRootItem();
        QStandardItem *thirdItem = findFirstThirdLevelItemDFS(rootItem);
        if (thirdItem)
        {
            QJsonObject thirdLevelObj = thirdItem->data(Qt::UserRole + 2).toJsonObject();
            if (thirdLevelObj.contains("IsThirdLevel") && thirdLevelObj["IsThirdLevel"].toBool())
            {
                QString multiTableName = "";
                if (thirdLevelObj.contains("TableName"))
                {
                    multiTableName = thirdLevelObj["TableName"].toString();
                }
                QList<CONFIG_BASE_STRUCT> buttons;
                int userGrade = 0x1;
                m_sqlOper->GetThirdDirButtons(multiTableName, userGrade, buttons);
                displayThirdLevelButtons(buttons);
                // loadButtonConfigForThirdLevel(thirdLevelObj);
            }
        }
    });

    // 应用自定义只读复选框委托
    m_pTreeViewDown->setItemDelegate(new NonInteractiveCheckDelegate(m_pTreeViewDown));
    menuArray[0] = {2, false,-1};
    menuArray[1] = {5, false,-1};
    menuArray[2] = {3, false,-1};
    menuArray[3] = {4, false,-1};
    menuArray[4] = {6, false,-1};
    currentMenuId = -1;
}

DbTreeViewManager::~DbTreeViewManager()
{
  
}

void DbTreeViewManager::Init()
{
    m_pTreeViewDown = new QTreeView(this);
    m_pCModel       = new QStandardItemModel(this);

    m_sqlOper       = &SqlOperation::GetInstance();
    m_pTreeCViewInterface = ns_module::CViewInterface::GetInstance();
}

// 创建横线样式
QFrame* DbTreeViewManager::createUnifiedSeparator(QWidget *parent, int height)
{
    QFrame *separator = new QFrame(parent);
    separator->setFrameShape(QFrame::NoFrame); // 移除默认框架
    separator->setFixedHeight(height);         // 设置固定高度
    separator->setStyleSheet("background-color: #C7CAEB;");
    separator->hide();      // 初始化为隐藏
    return separator;
}

// 目录树样式
void DbTreeViewManager::applyCustomStyles() {
    m_pTreeViewDown->setStyleSheet(R"(
        /* 设置分支图标 */
        QTreeView::branch:closed:has-children {
            border-image: none;
            image: url(:/images/home_add.png);
        }
        QTreeView::branch:open:has-children {
            border-image: none;
            image: url(:/images/home_minus.png);
        }

        /* 设置多选框 */
        QTreeView::indicator:unchecked {
            image: url(:/images/home_NotSelecte.png);
        }
        QTreeView::indicator:checked {
            image: url(:/images/home_selected.png);
        }

        /* 背景透明，行间距 */
        QTreeView {
            background: transparent;
            border: none;
        }

        /* 设置项目选中的背景色 */
        QTreeView::item:selected {
            background-color: #A9B4FF;
        }

        /* 设置项目的行间距 */
        QTreeView::item {
            padding-top: 5px;    /* 上边距 */
            padding-bottom: 5px; /* 下边距 */
        }
    )");
}

// 检查权限
bool DbTreeViewManager::hasPrivilege(const int &UserGrade, const int &userPrivilege)
{
    bool hasPriv;
    // UserGrade 是以逗号分隔的字符串，如 "1,2,3"
    if(UserGrade==userPrivilege){
        hasPriv = true;
    }else{
        hasPriv = false;
    }
    // qDebug() << "Checking privilege. UserGrade:" << UserGrade << "userPrivilege:" << userPrivilege << "result:" << hasPriv;
    return hasPriv;
}
//void DbTreeViewManager::updateDb(const QString &TableName, const int &Id,const QString currentValue){
//    QSqlDatabase db = QSqlDatabase::database();
//    if (!db.isOpen()) {
//        qWarning() << "数据库未打开";
//    }
//    QString sql = QString("UPDATE %1 SET currentValue = :newValue WHERE id = :id").arg(TableName);
//    QSqlQuery query;
//    query.prepare(sql);
//    query.bindValue(":newValue", currentValue);
//    query.bindValue(":id", Id);
//    // 执行更新操作
//    if (!query.exec()) {
//        qWarning() << "Failed to update currentValue:" << query.lastError().text();
//    } else {
//        qDebug() << "currentValue updated successfully.";
//    }
//}

void DbTreeViewManager::initializeTree(QString name, const int &userPrivilege)
{
    QString strLog = "Initializing tree with configId:";
    strLog += name;
    strLog += "and userPrivilege:";
    strLog += userPrivilege;
    JLogAllOutput::cmd_debug(strLog.toStdString());

    m_currentConfigName = name;  // 设置当前配置ID
    // 先清空历史
    clearHistory();

    // 保存之前的选中/展开状态
    m_blockItemChanged = true;
    m_isRestoring = true;

    // 清理当前的分隔线
    clearAllSeparators();

    // 清空已有模型数据和相关记录
    m_pCModel->clear();
    firstLevelSeparators.clear();
    expandedPaths.clear();

    // 清理并隐藏三级目录窗口
    clearThirdLevelMenu();

    // **Home 界面逻辑**
    if (name == "Home") 
    {
        // 隐藏目录树和分隔线
        m_pTreeViewDown->hide();
        for (auto separator : firstLevelSeparators) 
        {
            if (separator)
            {
                separator->hide();
            }
        }
        // 隐藏导航栏
        m_pNavigationWidget->hide();

        // 隐藏按钮
        updateButtonsVisibility(); // 将按钮隐藏

        // 隐藏特定的分隔线 lineFrame1
        if (m_pLineFrame1) 
        {
            m_pLineFrame1->hide();
        }

        // 从 BondHead 和 Buttons 表中加载 DirectoryId = 1 的数据
        QList<Table_Control_Data> tableControlDatas;
        bool allChangeFlag = false;
        m_sqlOper->GetThirdDirControlData("HomeProduct", userPrivilege, tableControlDatas, allChangeFlag);
        //QJsonObject data = fetchThirdLevelData(1, userPrivilege);
        displayThirdLevelFields(tableControlDatas, allChangeFlag, true);   // 传递参数表示 Home 界面

        // 把当前页面压到 m_backStack 里
        PageState st;
        st.path << "Home";
        st.isThirdLevel = true;
        st.directoryId = 1;
        st.multiTableName = "HomeProduct";

        m_backStack.append(st);
        if(m_backStack.size() >= 2){
            buttonLeft->setIcon(QIcon(":/images/home_left.png"));
        }

    } else {
        // **其他配置逻辑**
        // 设置 treeViewDown 的几何位置
        m_pTreeViewDown->setGeometry(16, 106, m_pOriginalWndMenuPage->width() - 16, m_pOriginalWndMenuPage->height() - 106);
        // 显示目录树和分隔线
        m_pTreeViewDown->show();
        for (auto separator : firstLevelSeparators) {
            if (separator)
                separator->show();
        }
        // 应用自定义样式
        applyCustomStyles();

        // 显示导航栏
        m_pNavigationWidget->show();

        // 显示按钮
        updateButtonsVisibility();

        // 显示特定的分隔线 lineFrame1
        if (m_pLineFrame1) {
            m_pLineFrame1->show();
        }

        // 加载目录数据 并进行权限判断
        QString tableName = "Dir_" + name;
        QList<QJsonObject> directories;
        m_sqlOper->GetDirectories(tableName, userPrivilege, directories);
        //m_sqlOper.loadDirectories(tableName, userPrivilege, directories);
        buildTreeFromDirectories(directories);
        //loadDirectories(configId, userPrivilege);
        // 
        // 更新分隔线
        updateSeparatorLine();

        m_blockItemChanged = false;

        m_isRestoring = false;

        // qDebug() << "Tree initialization completed.";

        // 恢复展开路径
        loadExpandedPaths();

        // 恢复复选框状态
        loadCheckedPaths();

        // 自动选中第一个根目录项并更新导航栏
        QStandardItem *rootItem = m_pCModel->invisibleRootItem()->child(0);
        if (rootItem) {
            QModelIndex rootIndex = m_pCModel->indexFromItem(rootItem);
            m_pTreeViewDown->setCurrentIndex(rootIndex);
            updateNavigationBar(rootIndex);

            // 如果当前根目录是三级目录，则加载其字段内容
            QVariant dataVar = rootItem->data(Qt::UserRole + 2).toJsonObject();
            bool isThirdLevel = false;
            int directoryId = -1;
            QString multiTableName = "";
            if (dataVar.canConvert<QJsonObject>()) {
                QJsonObject thirdLevelObj = dataVar.toJsonObject();
                if (thirdLevelObj.contains("IsThirdLevel") && thirdLevelObj["IsThirdLevel"].toBool()) {
                    isThirdLevel = true;
                    if (thirdLevelObj.contains("Id")) {
                        directoryId = thirdLevelObj["Id"].toInt();
                    }
                    if (thirdLevelObj.contains("TableName"))
                    {
                        multiTableName = thirdLevelObj["TableName"].toString();
                    }
                }
            }
            if (isThirdLevel) {
                if (directoryId == -1) {
                    // qWarning() << "无效的 DirectoryId，无法加载第三层目录内容。";
                    return;
                }
                //   userPrivilege 同样传递
                //QJsonObject data = fetchThirdLevelData(directoryId, userPrivilege);
                QList<Table_Control_Data> tableControlDatas;
                bool allChangeFlag = false;
                m_sqlOper->GetThirdDirControlData(multiTableName, userPrivilege, tableControlDatas, allChangeFlag);
                //QJsonObject data = fetchThirdLevelData(1, userPrivilege);
                displayThirdLevelFields(tableControlDatas, allChangeFlag, false);   // 传递参数表示 Home 界面




                //QJsonObject data = m_sqlOper.fetchThirdLevelData(multiTableName, directoryId, userPrivilege);
                //displayThirdLevelFields(data, false); // 传递参数表示非 Home 界面


                // 把当前状态压入 m_backStack
                PageState st;
                st.path = buildItemPath(rootItem);
                st.isThirdLevel = true;
                st.directoryId = directoryId;
                st.multiTableName = multiTableName;

                m_backStack.append(st);
                if(m_backStack.size() >= 2){

                    buttonLeft->setIcon(QIcon(":/images/home_left.png"));
                }
            }
        } else {
            // qWarning() << "树形模型中没有根目录项。";
        }


        //寻找第一个三级目录，显示第一个三级目录的按钮

        // 自动找第一个三级目录
        QStandardItem *rootItem1 = m_pCModel->invisibleRootItem();
        QStandardItem *firstThirdItem = findFirstThirdLevelItemDFS(rootItem1);
        if (!firstThirdItem) {
            // qDebug() << "[initializeTree] No third-level item found, do nothing.";
            return;
        }
        //  QStandardItem 里获取它的目录信息
        QVariant dataVar = firstThirdItem->data(Qt::UserRole + 2);
        if (!dataVar.canConvert<QJsonObject>()) {
            // qWarning() << "[initializeTree] firstThirdItem->data 无法转换为 QJsonObject";
            return;
        }
        QJsonObject dirObj = dataVar.toJsonObject();
        if (!dirObj.contains("Id")) {
            // qWarning() << "[initializeTree] 第一个三级目录无 Id 字段，无法加载";
            return;
        }
        int directoryId = dirObj["Id"].toInt();
        if (!dirObj.contains("TableName"))
        {
            return;
        }

        QString multiTableName = dirObj["TableName"].toString();

        //根据目录ID找出按钮
        QTimer::singleShot(0, this, &DbTreeViewManager::updateSeparatorLine);

        QList<CONFIG_BASE_STRUCT> buttons;
        m_sqlOper->GetThirdDirButtons(multiTableName, userPrivilege, buttons);
        //QJsonObject data = fetchThirdLevelData(1, userPrivilege);      
        displayThirdLevelButtons(buttons);   // 传递参数表示 Home 界面


        // 数据库BondHead/Buttons
        //QJsonObject data = fetchThirdLevelData(directoryId, userPrivilege);
        //if (!data.contains("buttons")) {
        //    // 第三层没有 buttons 字段
        //    qWarning() << "[initializeTree] fetchThirdLevelData: no 'buttons', skip";
        //    return;
        //}

        //   singleShot  在所有展开操作完成后更新分隔线
       

        //  loadButtonConfigForThirdLevel 显示按钮
        //loadButtonConfigForThirdLevel(data);
    }

}





// 从数据库加载目录  包含权限判断
void DbTreeViewManager::loadDirectories(int configId, const int &userPrivilege)
{
    // qDebug() << "Loading directories for configId:" << configId << "with userPrivilege:" << userPrivilege;

    QSqlDatabase db = QSqlDatabase::database();
    if (!db.isOpen()) {
        qWarning() << "数据库未打开";
        return;
    }

    QSqlQuery query(db);
    query.prepare(R"(
        SELECT Id, Name, ParentId, IsThirdLevel, Separator, UserGrade, Circle
        FROM Directories
        WHERE ConfigId = :configId
    )");
    query.bindValue(":configId", configId);

    if (!query.exec()) {
        qWarning() << "查询 Directories 失败:" << query.lastError().text();
        return;
    }

    // 以 QJsonObject 保存所有目录
    QList<QJsonObject> directories;
    while (query.next()) {
        QJsonObject obj;
        int id = query.value("Id").toInt();
        obj["Id"] = id;
        obj["Name"] = query.value("Name").toString();
        obj["ParentId"] = query.value("ParentId").isNull() ? -1 : query.value("ParentId").toInt();
        obj["IsThirdLevel"] = query.value("IsThirdLevel").toBool();
        obj["Separator"] = query.value("Separator").toInt();
        obj["UserGrade"] = query.value("UserGrade").toString();
        obj["Circle"] = query.value("Circle").toInt();
        qDebug() << "加载目录："<< obj["Name"].toString() << " ParentId:" << obj["ParentId"].toInt()<< " Separator:" << obj["Separator"].toInt();
        qDebug() << " Circle:" << obj["Circle"].toInt();

        // 权限判断：只有当记录的 UserGrade 中包含当前用户权限时才加入
        bool ok;
        if (hasPrivilege(obj["UserGrade"].toString().toInt(&ok,16), userPrivilege))
            directories.append(obj);
        else
            qDebug() << "目录跳过（权限不足）:" << obj["Name"].toString();
    }


    // qDebug() << "Loaded directories count:" << directories.size();

    //  根据目录列表构建树模型
    buildTreeFromDirectories(directories);
}



void DbTreeViewManager::buildTreeFromDirectories(const QList<QJsonObject> &directories)
{
    // 建立 Id->QStandardItem 的映射
    QMap<int, QStandardItem*> idItemMap;
    for (const QJsonObject &dir : directories) {
        QStandardItem *item = new QStandardItem(dir["Name"].toString());
        item->setData(dir["Id"].toInt(), Qt::UserRole + 1);  // 保存目录Id
        // 如果是三级目录，将整个 JSON 对象存到 UserRole+2
        if (dir["IsThirdLevel"].toBool()) {
            item->setData(dir, Qt::UserRole + 2);
        } else {
            item->setData(false, Qt::UserRole + 2); // 标记为非三级目录
        }
        item->setCheckable(true);
        //  复选框状态由程序逻辑设置
        item->setCheckState(Qt::Unchecked);
        idItemMap.insert(dir["Id"].toInt(), item);
    }

    // 建立父子关系
    for (const QJsonObject &dir : directories) {
        int parentId = dir["ParentId"].toInt();
        int currentId = dir["Id"].toInt();
        QStandardItem *childItem = idItemMap.value(currentId);

        if (childItem == nullptr)
        {
            qDebug() << "child is nullptr";
        }

        if (parentId == -1) {
            // 说明这是一级目录
            m_pCModel->invisibleRootItem()->appendRow(childItem);
            qDebug() << " !!!!! first :" << "child : " << currentId;


            // 如果一级目录的 "Separator" == 1，则为其创建一条分割线
            if (dir["Separator"].toInt() == 1) {
                QFrame *sep = createUnifiedSeparator(m_pOriginalWndMenuPage, 2);
                sep->hide();
                firstLevelSeparators.insert(childItem, sep);
            }

        } else {
            // 非一级目录 => 子目录
            QStandardItem *parentItem = idItemMap.value(parentId);
            if (parentItem)
            {
                parentItem->appendRow(childItem);
                qDebug() << "parent:" << parentId << "child : " << currentId;
            }               
            else
                qWarning() << "无法找到 ParentId:" << parentId << "的父目录项";
        }
    }
}


// 查询三级目录下的 BondHead 和 Buttons 数据 均判断权限

//QJsonObject DbTreeViewManager::fetchThirdLevelData(int directoryId, const int &userPrivilege)
//{
//    QJsonObject data;
//    QJsonArray fieldsArray;
//    QJsonArray buttonsArray;
//    QString temp;
//    bool allChangeFlag = true; // 默认所有 ChangeFlag 为 true
//
//    QSqlDatabase db = QSqlDatabase::database();
//    if (!db.isOpen()) {
//        qWarning() << "数据库未打开";
//        return data;
//    }
//    // 查询 TableName 表
//    QSqlQuery queryBondtest(db);
//    queryBondtest.prepare(R"(
//        SELECT TableName
//        FROM Directories
//        WHERE Id = :dirId
//    )");
//    queryBondtest.bindValue(":dirId",directoryId);
//    if (queryBondtest.exec()) {
//        while (queryBondtest.next()) {
//            temp = queryBondtest.value("TableName").toString();
//        }
//    }
//    QStringList tableName = temp.split(",");
//    QString currentTableName;
//    for (const QString &item : tableName) {
//        if (item.isEmpty()) {
//            qDebug() << "Encountered an empty string, stopping traversal.";
//            break; // 遇到空字符串时退出循环
//        }else{
//            currentTableName = item;
//            QString sql = QString("SELECT Id, DirectoryId, Describe, Type, Value,CurrentValue,UpLimit,DownLimit,units, Groupld, UserGrade, ChangeFlag FROM %1 WHERE DirectoryId = :dirId").arg(currentTableName);
//            // 查询 BondHead 表
//            QSqlQuery queryBond(db);
//            queryBond.prepare(sql);
//            queryBond.bindValue(":dirId", directoryId);
//            if (queryBond.exec()) {
//                while (queryBond.next()) {
//                    bool ok;
//                    int dbUserGrade = queryBond.value("UserGrade").toString().toInt(&ok, 16);
//                    // 只有当数据库记录的 UserGrade 包含当前用户权限时才加载该字段
//                    if (!hasPrivilege(dbUserGrade, userPrivilege))
//                        continue;
//                    QJsonObject field;
//                    field["Id"] = queryBond.value("Id").toInt();
//                    field["DirectoryId"] = queryBond.value("DirectoryId").toInt();
//                    field["Describe"] = queryBond.value("Describe").toString();
//                    field["Type"] = queryBond.value("Type").toString();
//                    field["Value"] = queryBond.value("Value").toString();
//                    field["CurrentValue"] = queryBond.value("CurrentValue").toString();
//                    field["UpLimit"] = queryBond.value("UpLimit").toString();
//                    field["DownLimit"] = queryBond.value("DownLimit").toString();
//                    field["units"] = queryBond.value("units").toString();
//                    field["Groupld"] = queryBond.value("Groupld").toInt();
//                    field["ChangeFlag"] = queryBond.value("ChangeFlag").toInt();
//                    field["TableName"] = currentTableName;
//                    fieldsArray.append(field);
//
//                    // 如果有任一字段 ChangeFlag 为 0，则 allChangeFlag = false
//                    if (queryBond.value("ChangeFlag").toInt() == 0)
//                        allChangeFlag = false;
//                }
//                // qDebug() << "Fetched fields:" << fieldsArray;
//            } else {
//                qWarning() << "查询 BondHead 失败:" << queryBond.lastError().text();
//            }
//        }
//    }
//    //QString sql = QString("SELECT Id, DirectoryId, Describe, Type, Value,units, Groupld, UserGrade, ChangeFlag FROM %1 WHERE DirectoryId = :dirId").arg(currentTableName);
//    // // 查询 BondHead 表
//    // QSqlQuery queryBond(db);
//    // queryBond.prepare(sql);
//    // queryBond.bindValue(":dirId", directoryId);
//    // if (queryBond.exec()) {
//    //     while (queryBond.next()) {
//    //         bool ok;
//    //         int dbUserGrade = queryBond.value("UserGrade").toString().toInt(&ok, 16);
//    //         // 只有当数据库记录的 UserGrade 包含当前用户权限时才加载该字段
//    //         if (!hasPrivilege(dbUserGrade, userPrivilege))
//    //             continue;
//    //         QJsonObject field;
//    //         field["Id"] = queryBond.value("Id").toInt();
//    //         field["DirectoryId"] = queryBond.value("DirectoryId").toInt();
//    //         field["Describe"] = queryBond.value("Describe").toString();
//    //         field["Type"] = queryBond.value("Type").toString();
//    //         field["Value"] = queryBond.value("Value").toString();
//    //         field["units"] = queryBond.value("units").toString();
//    //         field["Groupld"] = queryBond.value("Groupld").toInt();
//    //         field["ChangeFlag"] = queryBond.value("ChangeFlag").toInt();
//    //         fieldsArray.append(field);
//
//    //         // 如果有任一字段 ChangeFlag 为 0，则 allChangeFlag = false
//    //         if (queryBond.value("ChangeFlag").toInt() == 0)
//    //             allChangeFlag = false;
//    //     }
//    //     // qDebug() << "Fetched fields:" << fieldsArray;
//    // } else {
//    //     qWarning() << "查询 BondHead 失败:" << queryBond.lastError().text();
//    // }
//
//    // 查询 Buttons 表
//    QSqlQuery queryBtn(db);
//    queryBtn.prepare(R"(
//        SELECT ButtonId, Icon, Text, Enabled, UserGrade
//        FROM Buttons
//        WHERE DirectoryId = :dirId
//    )");
//    queryBtn.bindValue(":dirId", directoryId);
//    if (queryBtn.exec()) {
//        while (queryBtn.next()) {
//            bool ok;
//            int btnUserGrade = queryBtn.value("UserGrade").toString().toInt(&ok, 16);
//            if (!hasPrivilege(btnUserGrade, userPrivilege))
//                continue;
//            QJsonObject button;
//            button["id"] = queryBtn.value("ButtonId").toString();
//            button["icon"] = queryBtn.value("Icon").toString();
//            button["text"] = queryBtn.value("Text").toString();
//            button["enabled"] = queryBtn.value("Enabled").toBool();
//            buttonsArray.append(button);
//        }
//        // qDebug() << "Fetched buttons:" << buttonsArray;
//    } else {
//        qWarning() << "查询 Buttons 失败:" << queryBtn.lastError().text();
//    }
//
//    data["fields"] = fieldsArray;
//    data["buttons"] = buttonsArray;
//    data["IsThirdLevel"] = true;
//    data["allChangeFlag"] = allChangeFlag;
//    return data;
//}

// 事件过滤器，用于自定义绘制虚线
bool DbTreeViewManager::eventFilter(QObject *watched, QEvent *event)
{
    // 拦截 Paint 事件
    if (watched == m_pTreeViewDown->viewport() && event->type() == QEvent::Paint)
    {
        // 进行默认绘制
        bool handled = QWidget::eventFilter(watched, event);

        // 使用 QPainter 叠加画“拐角线”
        QPainter painter(m_pTreeViewDown->viewport());
        if (!painter.isActive()) {
            qWarning() << "Painter not active";
            return handled;
        }
        painter.save();
        painter.setPen(QPen(Qt::gray, 1, Qt::DashLine)); // 灰色、1px 宽、虚线

        // 调用递归函数，绘制所有分支
        paintAllBranches(QModelIndex(), painter);
        painter.restore();
        return handled;
    }
    // 其余事件交给父类默认处理
    return QWidget::eventFilter(watched, event);
}




// 递归绘制所有分支
void DbTreeViewManager::paintAllBranches(const QModelIndex &parentIndex, QPainter &painter)
{
    int rowCount = m_pCModel->rowCount(parentIndex);
    for(int i = 0; i < rowCount; ++i)
    {
        // 当前子节点
        QModelIndex childIndex = m_pCModel->index(i, 0, parentIndex);
        if (!childIndex.isValid()) continue;

        // 1) 父->子拐角线
        drawParentChildLine(childIndex, painter);

        // 2) 兄弟延续竖线(如果本节点不是最后一个兄弟，就在拐点列画条向下的线)
        if (i < rowCount - 1) {
            drawSiblingLine(childIndex, painter);
        }

        // 3) 递归处理子节点
        paintAllBranches(childIndex, painter);
    }
}

// 在“父节点 -> 子节点”间画一条“L”型拐角线，调整横向线段的长度
void DbTreeViewManager::drawParentChildLine(const QModelIndex &childIndex, QPainter &painter)
{
    QModelIndex parentIndex = childIndex.parent();
    if (!parentIndex.isValid()) {
        // “顶层节点”定义一个固定的起点 (rootX, rootY)
        int indent = m_pTreeViewDown->indentation();
        int depth = 0;  // 顶层节点深度为0
        int branchX = (depth + 1) * indent - indent / 2; // 计算 branchX 基于缩进和深度

        // 定义 rootY 为节点中心 Y
        QRect childRect = m_pTreeViewDown->visualRect(childIndex);
        if (!childRect.isValid())
            return;

        int rootY = childRect.center().y();

        // 定义横向偏移量
        const int hOffset = -20;

        // 绘制竖线
        painter.drawLine(QPoint(branchX, rootY),
                         QPoint(branchX, childRect.center().y()));

        // 计算新的横线终点
        int newX = childRect.left() + hOffset;

        // 绘制横线
        painter.drawLine(QPoint(branchX, childRect.center().y()),
                         QPoint(newX, childRect.center().y()));
        return;
    }

    QRect parentRect = m_pTreeViewDown->visualRect(parentIndex);
    QRect childRect  = m_pTreeViewDown->visualRect(childIndex);
    if (!parentRect.isValid() || !childRect.isValid()) {
        // 父或子超出可视区域
        return;
    }

    int pMidY = parentRect.center().y();
    int cMidY = childRect.center().y();

    // 计算节点深度
    int depth = 0;
    QModelIndex p = parentIndex;
    while (p.isValid()) {
        depth++;
        p = p.parent();
    }

    int indent = m_pTreeViewDown->indentation();
    int branchX = depth * indent - indent / 2;

    // branchX 不超出视图范围
    branchX = std::max(branchX, 0);

    // 定义横向偏移量
    const int hOffset = -15;

    // 绘制竖线
    painter.drawLine(QPoint(branchX, pMidY), QPoint(branchX, cMidY));

    // 计算新的横线终点
    int newX = childRect.left() + hOffset;

    // 绘制横线
    painter.drawLine(QPoint(branchX, cMidY), QPoint(newX, cMidY));
}

// 节点下面还有兄弟，则在拐点列那里继续往下画竖线
void DbTreeViewManager::drawSiblingLine(const QModelIndex &childIndex, QPainter &painter)
{
    QModelIndex parentIndex = childIndex.parent();
    if (!parentIndex.isValid()) {
        return;     // 没有父节点
    }

    // 下一个兄弟
    int row       = childIndex.row();
    int lastRow   = m_pCModel->rowCount(parentIndex) - 1;
    if (row >= lastRow) {
        return; // 说明是最后一个兄弟，不用画延伸线
    }

    QModelIndex nextSibling = m_pCModel->index(row + 1, 0, parentIndex);
    QRect currRect = m_pTreeViewDown->visualRect(childIndex);
    QRect nextRect = m_pTreeViewDown->visualRect(nextSibling);
    if (!currRect.isValid() || !nextRect.isValid()) {
        return;
    }

    // 计算节点深度
    int depth = 0;
    QModelIndex p = parentIndex;
    while (p.isValid()) {
        depth++;
        p = p.parent();
    }

    int indent = m_pTreeViewDown->indentation();
    int branchX = depth * indent - indent / 2;

    // 确保 branchX 不超出视图范围
    branchX = std::max(branchX, 0);

    // 从当前节点底部向下延伸到下一个兄弟节点顶部
    int startY = currRect.bottom();
    int endY   = nextRect.top();

    painter.drawLine(QPoint(branchX, startY), QPoint(branchX, endY));
}

// 递归查找第一个三级目录项
QStandardItem* DbTreeViewManager::findFirstThirdLevelItemDFS(QStandardItem *parentItem)
{
    if (!parentItem) {
        return nullptr;
    }

    // 遍历当前 parentItem 的所有子
    for (int i = 0; i < parentItem->rowCount(); ++i) {
        QStandardItem *child = parentItem->child(i);
        if (!child) continue;

        // 检查这个子节点是否是三级目录
        QVariant data = child->data(Qt::UserRole + 2);
        if (data.canConvert<QJsonObject>()) {
            QJsonObject obj = data.toJsonObject();
            if (obj.contains("IsThirdLevel") && obj["IsThirdLevel"].toBool()) {
                // 找到第一个 IsThirdLevel = true 的节点就返回
                return child;
            }
        }
        // 如果不是 IsThirdLevel，继续往子节点里找
        QStandardItem* deeperFound = findFirstThirdLevelItemDFS(child);
        if (deeperFound) {
            return deeperFound;
        }
    }

    return nullptr;
}


void DbTreeViewManager::onItemChanged(QStandardItem *item)
{
    if (m_blockItemChanged || m_isRestoring) {
        return; // 防止递归和恢复期间触发
    }

    m_blockItemChanged = true;

    Qt::CheckState state = item->checkState();

    // 更新所有子项的复选框状态
    for (int i = 0; i < item->rowCount(); ++i) {
        QStandardItem *child = item->child(i);
        if (child) {
            child->setCheckState(state);
            // 递归更新子项
            onItemChanged(child);
        }
    }

    // 更新所有父项的复选框状态
    QModelIndex parentIndex = item->index().parent();
    while (parentIndex.isValid()) {
        QStandardItem *parentItem = m_pCModel->itemFromIndex(parentIndex);
        if (!parentItem) break;

        int checkedCount = 0;
        int totalCount = parentItem->rowCount();
        for (int i = 0; i < totalCount; ++i) {
            QStandardItem *child = parentItem->child(i);
            if (child && child->checkState() == Qt::Checked) {
                checkedCount++;
            }
        }

        if (checkedCount == totalCount) {
            parentItem->setCheckState(Qt::Checked);
        }
        else {
            parentItem->setCheckState(Qt::Unchecked);
        }

        parentIndex = parentIndex.parent();
    }

    m_blockItemChanged = false;

    // 记录复选框状态
    saveCheckedPaths();
}



// 初始化和设置按钮
void DbTreeViewManager::setupButton()
{
    // 创建按钮并设置属性
    auto createButton = [&](QPushButton*& button, const QString& iconPath, const QRect& geometry) {
        button = new QPushButton(this);
        button->setIcon(QIcon(iconPath));
        button->setGeometry(geometry);
        button->setStyleSheet(R"(
            QPushButton {
                position: absolute;
                border-radius: 6px;
                opacity: 1;
                background: #FFFFFF;
                border: 1px solid #BABBDC;
            }
            QPushButton:hover {
                background-color: #A9B4FF; /* 鼠标悬停效果 */
            }
        )");
        button->show();
    };

    // 根据原始代码调整按钮的位置和大小
    createButton(ButtonBack, ":/images/home_openFile.png", QRect(328, 6, 76, 30));
    createButton(buttonUp, ":/images/home_up.png", QRect(408, 6, 36, 30));
    createButton(buttonDown, ":/images/home_down.png", QRect(408, 40, 36, 30));
    createButton(buttonLeft, ":/images/home_left_hide.png", QRect(328, 40, 36, 30));
    createButton(buttonRight, ":/images/home_right.png", QRect(368, 40, 36, 30));

    // 连接按钮的点击信号到相应的槽函数
    connect(ButtonBack, &QPushButton::clicked, this, &DbTreeViewManager::onButtonBackClicked);
    connect(buttonUp, &QPushButton::clicked, this, &DbTreeViewManager::onButtonUpClicked);
    connect(buttonDown, &QPushButton::clicked, this, &DbTreeViewManager::onButtonDownClicked);
    connect(buttonLeft, &QPushButton::clicked, this, &DbTreeViewManager::onButtonLeftClicked);
    connect(buttonRight, &QPushButton::clicked, this, &DbTreeViewManager::onButtonRightClicked);
}


void DbTreeViewManager::updateButtonsVisibility()
{
    if (m_currentConfigName == "Home") {
        // Home 界面，隐藏所有按钮
        ButtonBack->hide();
        buttonUp->hide();
        buttonDown->hide();
        buttonLeft->hide();
        buttonRight->hide();
    }
    else {
        // 其他配置，显示所有按钮
        ButtonBack->show();
        buttonUp->show();
        buttonDown->show();
        buttonLeft->show();
        buttonRight->show();
    }
}
QStandardItem* DbTreeViewManager::deepCopyItem(const QStandardItem *item){
    if (!item) {
        return nullptr;
    }

    // 创建一个新的 QStandardItem
    QStandardItem *newItem = new QStandardItem(item->text());
    newItem->setIcon(item->icon());
    newItem->setToolTip(item->toolTip());
    newItem->setEditable(item->isEditable());
    newItem->setCheckable(item->isCheckable());
    newItem->setCheckState(item->checkState());

    // 递归复制子项
    for (int i = 0; i < item->rowCount(); ++i) {
        QStandardItem *childItem = item->child(i);
        QStandardItem *newChildItem = deepCopyItem(childItem);
        newItem->appendRow(newChildItem);
    }

    return newItem;
}
void DbTreeViewManager::loadpage(const int &configId){
    for(int i=0;i<5;i++){
        if(configId == menuArray[i].menuId){

           // QJsonObject data = fetchThirdLevelData(menuArray[i].index, 0x1);
            //displayThirdLevelFields(data, false);
        }
    }
}

void DbTreeViewManager::onTreeViewClicked(const QModelIndex &index)
{
    QStandardItem *item = m_pCModel->itemFromIndex(index);
    if (!item) return;
    // 是否第三层，提取第三层的目录ID及目录表格名字
    bool isThird = false;
    int dirId = -1;
    QString strModuleType; // 模组

    //QString dirTableName = "";
    QString mutliTableName = "";
    QVariant dataVar = item->data(Qt::UserRole + 2);
    if (dataVar.canConvert<QJsonObject>()) {
        QJsonObject obj = dataVar.toJsonObject();
        qDebug() << " AAkey :" << obj;
        if (obj.contains("IsThirdLevel") && obj["IsThirdLevel"].toBool()) {
            isThird = true;
            if (obj.contains("Id")) {
                dirId = obj["Id"].toInt();
            }
            if (obj.contains("TableName"))
            {
                mutliTableName = obj["TableName"].toString();
            }

            if (obj.contains("ModuleType"))
            {
                strModuleType = obj["ModuleType"].toString();
                m_strModuleTypeAAA = strModuleType;
            }

        }
    }

    updateNavigationBar(index);

    if (isThird) {
        //！！！修改权限
        int userPrivilege = 0x1; // 示例
        if (dirId < 0) {
            qWarning() << "无效directoryId";
            return;
        }
        if (mutliTableName == "")
        {
            qWarning() << "无效directoryId";
            return;
        }
        QList<Table_Control_Data> tableControlDatas;
        bool allChangeFlag = false;
        m_sqlOper->GetThirdDirControlData(mutliTableName, userPrivilege, tableControlDatas, allChangeFlag);
        displayThirdLevelFields(tableControlDatas, allChangeFlag, false);   // 传递参数表示 Home 界面

        //QJsonObject data = m_sqlOper.fetchThirdLevelData(mutliTableName, dirId, userPrivilege);
        //QJsonObject data = fetchThirdLevelData(dirId, userPrivilege);
        //displayThirdLevelFields(data, false);
        for(int i=0;i<5;i++){
            if(currentMenuId == menuArray[i].menuId){
                menuArray[i].isthird = true;
                menuArray[i].index = dirId;
            }
        }

        // 将“新页面”压入后退栈, 并清空前进栈
        PageState st;
        st.path = buildItemPath(item);
        st.isThirdLevel = true;
        st.directoryId  = dirId;
        st.multiTableName = mutliTableName;

        m_backStack.append(st);
        if(m_backStack.size() >= 2){
            buttonLeft->setIcon(QIcon(":/images/home_left.png"));
        }
        m_forwardStack.clear();
        buttonRight->setIcon(QIcon(":/images/home_right.png"));
    } else {
        // 不是第三层，只是选中目录
        // 清理第三层窗口
        if (m_thirdLevelFieldWnd) {
            m_thirdLevelFieldWnd->close();
            m_thirdLevelFieldWnd->deleteLater();
            m_thirdLevelFieldWnd = nullptr;
        }

        // 同样更新历史
        PageState st;
        st.path = buildItemPath(item);
        st.isThirdLevel = false;
        st.directoryId  = -1;
        st.multiTableName = mutliTableName;

        m_backStack.append(st);
        if(m_backStack.size() >= 2){
            buttonLeft->setIcon(QIcon(":/images/home_left.png"));
        }
        m_forwardStack.clear();
        buttonRight->setIcon(QIcon(":/images/home_right.png"));
    }
}

void DbTreeViewManager::onTreeViewClicked_updown(const QModelIndex &index){
    QStandardItem *item = m_pCModel->itemFromIndex(index);
    if (!item) return;
    // 是否第三层
    bool isThird = false;
    int dirId = -1;
    QString multiTableName = "";
    QVariant dataVar = item->data(Qt::UserRole + 2);
    if (dataVar.canConvert<QJsonObject>()) {
        QJsonObject obj = dataVar.toJsonObject();
        if (obj.contains("IsThirdLevel") && obj["IsThirdLevel"].toBool()) {
            isThird = true;
            if (obj.contains("Id")) {
                dirId = obj["Id"].toInt();
            }
            if (obj.contains("TableName"))
            {
                multiTableName = obj["TableName"].toString();
            }
        }
    }

    updateNavigationBar(index);

    if (isThird) {
        int userPrivilege = 0x1; // 示例
        if (dirId < 0) {
            qWarning() << "无效directoryId";
            return;
        }
        if (multiTableName == "")
        {
            qWarning() << "无效multiTableName";
            return;
        }
        QList<Table_Control_Data> tableControlDatas;
        bool allChangeFlag = false;
        m_sqlOper->GetThirdDirControlData(multiTableName, userPrivilege, tableControlDatas, allChangeFlag);
        displayThirdLevelFields(tableControlDatas, allChangeFlag, false);   // 传递参数表示 Home 界面

       // QJsonObject data = m_sqlOper.fetchThirdLevelData(multiTableName, dirId, userPrivilege);
        //displayThirdLevelFields(data, false);
       // QJsonObject data = fetchThirdLevelData(dirId, userPrivilege);

        // 将“新页面”压入后退栈, 并清空前进栈
        PageState st;
        st.path = buildItemPath(item);
        st.isThirdLevel = true;
        st.directoryId  = dirId;
        st.multiTableName = multiTableName;

        m_backStack.append(st);
        if(m_backStack.size() >= 2){
            buttonLeft->setIcon(QIcon(":/images/home_left.png"));
        }
        m_forwardStack.clear();
        buttonRight->setIcon(QIcon(":/images/home_right.png"));
    } else {
        // 不是第三层，只是选中目录
        // 清理第三层窗口
        if (m_thirdLevelFieldWnd) {
            m_thirdLevelFieldWnd->close();
            m_thirdLevelFieldWnd->deleteLater();
            m_thirdLevelFieldWnd = nullptr;
        }

        // 同样更新历史
        PageState st;
        st.path = buildItemPath(item);
        st.isThirdLevel = false;
        st.directoryId  = -1;
        st.multiTableName = multiTableName;

        m_backStack.append(st);
        if(m_backStack.size() >= 2){
            buttonLeft->setIcon(QIcon(":/images/home_left.png"));
        }
        m_forwardStack.clear();
        buttonRight->setIcon(QIcon(":/images/home_right.png"));
    }
}



void DbTreeViewManager::updateNavigationBar(const QModelIndex &index)
{
    QStandardItem *item = m_pCModel->itemFromIndex(index);
    if (!item) {
        qWarning() << "导航栏更新失败：未找到对应项";
        return;
    }

    // 清理现有布局
    if (m_pNavigationWidget->layout()) {
        QLayoutItem *child;
        while ((child = m_pNavigationWidget->layout()->takeAt(0)) != nullptr) {
            if (child->widget()) {
                child->widget()->deleteLater();
            }
            delete child;
        }
        delete m_pNavigationWidget->layout();
    }

    // 构建路径列表，从当前项回溯到根节点
    QList<QStandardItem *> path;
    QStandardItem *temp = item;
    while (temp) {
        path.prepend(temp);     // 从根节点开始
        temp = temp->parent();
    }

    QVBoxLayout *newLayout = new QVBoxLayout; // 创建新的导航栏布局
    newLayout->setContentsMargins(0, 0, 3, 3);
    newLayout->setSpacing(0);

    // 确保显示三行
    for (int i = 0; i < 3; ++i) {
        QLabel *label = new QLabel;

        if (i < path.size()) {
            QString text = path[i]->text();
            if (i == 1) text = "    " + text;      // 二级目录缩进
            if (i == 2) text = "        " + text; // 三级目录缩进
            label->setText(text);
        } else {
            label->setText(""); // 填充空白行
        }

        QFont font = label->font();     // 设置字体和样式
        font.setPointSize(14);
        font.setFamily("思源黑体");
        font.setBold(true);         // 设置文字为粗体
        font.setLetterSpacing(QFont::PercentageSpacing,105);    // 设置字间距100%为默认
        label->setFont(font);
        label->setFixedHeight(m_pNavigationWidget->height() / 3);

        newLayout->addWidget(label);
    }

    // 设置布局并更新导航栏
    m_pNavigationWidget->setLayout(newLayout);
    m_pNavigationWidget->update();

}


void DbTreeViewManager::clearAllSeparators()
{
    // 遍历 firstLevelSeparators 中所有 QFrame，
    // 隐藏后调用 deleteLater()
    for (auto separator : firstLevelSeparators.values()) {
        if(separator) {
            separator->hide();
            separator->deleteLater();
        }
    }
    // 清空映射
    firstLevelSeparators.clear();
}



void DbTreeViewManager::updateSeparatorLine()
{
    // 如果目录树被隐藏，就把分割线都藏起来
    if (!m_pTreeViewDown->isVisible()) {
        for (auto it = firstLevelSeparators.begin(); it != firstLevelSeparators.end(); ++it) {
            QFrame *sep = it.value();
            if (sep) sep->hide();
        }
        return;
    }

    // 遍历所有“一级目录”与其分隔线
    for (auto it = firstLevelSeparators.begin(); it != firstLevelSeparators.end(); ++it) {
        QStandardItem *firstLevelItem = it.key();
        QFrame *separator = it.value();
        if (!firstLevelItem || !separator) continue;

        // 拿到可视区域
        QModelIndex firstLevelIndex = m_pCModel->indexFromItem(firstLevelItem);
        QRect firstLevelRect = m_pTreeViewDown->visualRect(firstLevelIndex);

        // 如果这个一级目录滚动到看不见了，就把分割线也藏起来
        if (!firstLevelRect.isValid()) {
            separator->hide();
            continue;
        }

        // 如果展开并且它有子节点，就找“最后一个可见子项”
        if (m_pTreeViewDown->isExpanded(firstLevelIndex) && firstLevelItem->hasChildren()) {
            QModelIndex lastVisibleChild = findLastVisibleChild(firstLevelIndex);
            if (lastVisibleChild.isValid()) {
                QRect lastChildRect = m_pTreeViewDown->visualRect(lastVisibleChild);
                if (lastChildRect.isValid()) {
                    // 将分割线放在最后一个子项下面
                    separator->setGeometry(16,lastChildRect.bottom() + 115, m_pOriginalWndMenuPage->width() - 40,1);
                    separator->show();
                    continue;
                }
            }
        }

        // 如果收起或找不到可见子项，就放在本一级目录下面
        separator->setGeometry(16,firstLevelRect.bottom() + 115, m_pOriginalWndMenuPage->width() - 40,1);
        separator->show();
    }
}


QModelIndex DbTreeViewManager::findLastVisibleChild(const QModelIndex &parentIndex) {
    if (!parentIndex.isValid()) return QModelIndex();

    int childCount = m_pCModel->rowCount(parentIndex);
    QModelIndex lastVisible;

    for (int i = childCount - 1; i >= 0; --i) {
        QModelIndex childIndex = m_pCModel->index(i, 0, parentIndex);
        if (!m_pTreeViewDown->isRowHidden(i, parentIndex)) {
            if (m_pTreeViewDown->isExpanded(childIndex) && m_pCModel->rowCount(childIndex) > 0) {
                QModelIndex deeper = findLastVisibleChild(childIndex);
                if (deeper.isValid()) {
                    return deeper;
                }
            }
            lastVisible = childIndex;
            break;
        }
    }
    return lastVisible;
}



//void DbTreeViewManager::displayThirdLevelFields(const QJsonObject &data, bool isHome)
//{
//    if (data.isEmpty()) {
//        qWarning() << "字段数据为空，无法显示";
//        return;
//    }
//
//    if (!data.contains("IsThirdLevel") || !data["IsThirdLevel"].toBool()) {
//        qWarning() << "不是三级目录，跳过按钮加载";
//        return;
//    }
//
//    bool allChangeFlag = false;
//    if (data.contains("allChangeFlag") && data["allChangeFlag"].isBool()) {
//        allChangeFlag = data["allChangeFlag"].toBool();
//    }
//    else {
//        qWarning() << "数据中缺少 'allChangeFlag' 字段或类型不正确";
//    }
//
//    // 若已有第三层窗口，先关闭并释放
//    if (m_thirdLevelFieldWnd) {
//        m_thirdLevelFieldWnd->close();
//        m_thirdLevelFieldWnd->deleteLater();
//        m_thirdLevelFieldWnd = nullptr;
//    }
//
//    // 获取当前选中的目录项，设置状态
//    QModelIndex currentIndex = treeViewDown->currentIndex();
//    if (currentIndex.isValid()) {
//        QStandardItem* currentItem = model->itemFromIndex(currentIndex);
//        if (currentItem) {
//            currentItem->setCheckState(allChangeFlag ? Qt::Checked : Qt::Unchecked);
//            qDebug() << "设置当前目录项复选框状态为：" << (allChangeFlag ? "Checked" : "Unchecked");
//        }
//    }
//    else {
//        qWarning() << "当前没有选中的目录项";
//    }
//
//    // 隐藏目录树及所有分隔线
//    treeViewDown->hide();
//    for (auto separator : firstLevelSeparators) {
//        if (separator)
//            separator->hide();
//    }
//
//    // 显示按钮
//    loadButtonConfigForThirdLevel(data);
//
//    // 清理之前的控件列表
//    m_fieldWidgets.clear();
//
//    // 创建新的 "字段展示" 窗口，并赋值给 m_thirdLevelFieldWnd
//    m_thirdLevelFieldWnd = new QWidget(widget2);
//    m_thirdLevelFieldWnd->setWindowTitle("字段展示");
//    m_thirdLevelFieldWnd->setStyleSheet("background-color: transparent;");
//    if (isHome) {
//        // Home 界面，填满 widget2
//        m_thirdLevelFieldWnd->setGeometry(0, 0, widget2->width(), widget2->height());
//    }
//    else {
//        // 其他配置界面，设置与 treeViewDown 相同的几何位置
//        m_thirdLevelFieldWnd->setGeometry(treeViewDown->geometry());
//    }
//
//    // 创建滚动区域
//    QScrollArea *scrollArea = new QScrollArea(m_thirdLevelFieldWnd);
//    scrollArea->setWidgetResizable(true);
//    scrollArea->setHorizontalScrollBarPolicy(Qt::ScrollBarAsNeeded);
//
//    // 创建滚动容器并设置布局
//    QWidget *scrollWidget = new QWidget;
//    scrollWidget->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Preferred);
//    QVBoxLayout *scrollLayout = new QVBoxLayout(scrollWidget);
//    scrollLayout->setSpacing(10);
//    scrollLayout->setContentsMargins(10, 10, 10, 10);
//
//
//    //！！！提成一个类
//    int previousGroupId = -1;
//    // 遍历字段数组
//    if (data.contains("fields") && data["fields"].isArray()) {
//        QJsonArray fields = data["fields"].toArray();
//        for (const QJsonValue &val : fields) {
//            QJsonObject field = val.toObject();
//            int fieldId = field["Id"].toInt();
//            QString fieldName = field["Name"].toString();
//            QString fieldType = field["Type"].toString();
//            QString fieldValue = field["Value"].toString();
//            //QString fieldCurrentValue = field["CurrentValue"].toString();
//            QString fieldTableName = field["TableName"].toString();
//            QString fieldUpLimit = field["UpLimit"].toString();
//            QString fieldDownLimit = field["DownLimit"].toString();
//            QString fieldUnits = field["units"].toString();
//            int groupId = field["Groupld"].toInt();
//
//            // 如果组变化，插入分隔线
//            if (previousGroupId != -1 && groupId != previousGroupId) {
//                QFrame *separator = createUnifiedSeparator(scrollWidget, 2);
//                QHBoxLayout *separatorLayout = new QHBoxLayout;
//                separatorLayout->setContentsMargins(0, 5, 0, 5);
//                separatorLayout->addWidget(separator);
//                scrollLayout->addLayout(separatorLayout);
//                separator->show();
//            }
//            previousGroupId = groupId;
//
//            // 每个字段一行
//            QHBoxLayout *fieldLayout = new QHBoxLayout;
//            fieldLayout->setSpacing(5);
//
//            QLabel *label = new QLabel(fieldName);
//            label->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
//            label->setFixedHeight(24);
//            label->setMinimumWidth(120);
//            fieldLayout->addWidget(label);
//            fieldLayout->addStretch(1);
//
//            QWidget *rightWidget = new QWidget;
//            QHBoxLayout *rightLayout = new QHBoxLayout(rightWidget);
//            rightLayout->setContentsMargins(0, 0, 20, 0);
//            rightLayout->setSpacing(5);
//
//            QWidget *createdWidget = nullptr;
//
//            if (fieldType == "input") {
//                // 检查 Value 中是否包含逗号分隔（比如 "请输入内容1,分钟"）
//                if (fieldUnits!= "") {
//                    // // 采用逗号分割，trim去除空白
//                    // QStringList parts = fieldValue.split(",", Qt::SkipEmptyParts);
//                    // QString leftText = parts.at(0).trimmed();
//                    // QString rightText = (parts.size() > 1 ? parts.at(1).trimmed() : QString());
//
//                    // 创建 QLineEdit 显示左边文本
//                    QLineEdit *lineEdit = new QLineEdit();
//                    if((fieldUpLimit=="")&&(fieldDownLimit=="")){
//                        lineEdit->setText(fieldValue);
//                        lineEdit->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
//                        lineEdit->setFixedSize(105, 28);
//                        lineEdit->setAlignment(Qt::AlignLeft);
//                        //！！！提到前面
//                        lineEdit->setStyleSheet(R"(
//                        QLineEdit {
//                            background: #FFFFFF;
//                            border: 1px solid #BABBDC;
//                            border-radius: 6px;
//                            padding: 2px 5px;
//                        }
//                    )");
//                    }else{//上下限至少设置了一个值
//                        if(fieldValue == ""){
//                           lineEdit->setPlaceholderText("请输入数字");
//                        }else{
//                           lineEdit->setText(fieldValue);
//                        }
//
//
//                        lineEdit->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
//                        lineEdit->setFixedSize(105, 28);
//                        lineEdit->setAlignment(Qt::AlignLeft);
//                        lineEdit->setStyleSheet(R"(
//                        QLineEdit {
//                            background: #FFFFFF;
//                            border: 1px solid #BABBDC;
//                            border-radius: 6px;
//                            padding: 2px 5px;
//                        }
//                    )");
//                    }
//
//                    // 创建 QLabel 显示右边文本（比如 "分钟"）
//                    QLabel *unitLabel = new QLabel(fieldUnits);
//                    unitLabel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
//                    unitLabel->setFixedHeight(28);
//                    unitLabel->setStyleSheet("QLabel { font-size: 14px; }");
//
//                    // 把 QLineEdit 和 QLabel 水平排列，确保 Qlabel 显示在 QLineEdit 右侧
//                    QHBoxLayout *inputLayout = new QHBoxLayout;
//                    inputLayout->setSpacing(10);
//                    inputLayout->setContentsMargins(0,0,0,0);
//                    inputLayout->addWidget(lineEdit);
//                    inputLayout->addWidget(unitLabel);
//
//                    // 用一个容器部件来装下这个布局
//                    QWidget *inputWidget = new QWidget;
//                    inputWidget->setLayout(inputLayout);
//                    rightLayout->addWidget(inputWidget);
//
//                    // 保存控件指针到 m_fieldWidgets（可选）
//                    m_fieldWidgets.append(lineEdit);
//                    m_fieldWidgets.append(unitLabel);
//                    createdWidget = inputWidget;
//                    // // 连接 textChanged 信号到 lambda 函数
//                    connect(lineEdit, &QLineEdit::textChanged, [this,lineEdit,fieldTableName,fieldId,fieldUpLimit,fieldDownLimit]() {
//                        if((fieldUpLimit!="")&&(fieldDownLimit!="")){
//                            int uplimit = fieldUpLimit.toInt();
//                            int downlimit = fieldDownLimit.toInt();
//                            int inputvalue = (lineEdit->text()).toInt();
//                            if((inputvalue<=uplimit)&&(inputvalue>=downlimit)){
//                                updateDb(fieldTableName,fieldId,lineEdit->text());
//                            }else{
//                                lineEdit->setPlaceholderText("超出设定范围，请重新输入");
//                            }
//                        }else if(fieldDownLimit!=""){
//                            int downlimit = fieldDownLimit.toInt();
//                            int inputvalue = (lineEdit->text()).toInt();
//                            if(inputvalue>=downlimit){
//                                updateDb(fieldTableName,fieldId,lineEdit->text());
//                            }else{
//                              lineEdit->setPlaceholderText("超出设定范围，请重新输入");
//                            }
//                        }else if(fieldUpLimit!=""){
//                            int uplimit = fieldUpLimit.toInt();
//                            int inputvalue = (lineEdit->text()).toInt();
//                            if(inputvalue<=uplimit){
//                                updateDb(fieldTableName,fieldId,lineEdit->text());
//                            }else{
//                                lineEdit->setPlaceholderText("超出设定范围，请重新输入");
//                            }
//                        }else{
//                           updateDb(fieldTableName,fieldId,lineEdit->text());
//                        }
//
//                    });
//                } else {
//                    // 如果不包含逗号，按原有逻辑只创建 QLineEdit
//                    QLineEdit *lineEdit1 = new QLineEdit(fieldValue);
//                    lineEdit1->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
//                    lineEdit1->setFixedSize(140, 28);
//                    lineEdit1->setAlignment(Qt::AlignLeft);
//                    lineEdit1->setStyleSheet(R"(
//                        QLineEdit {
//                            background: #FFFFFF;
//                            border: 1px solid #BABBDC;
//                            border-radius: 6px;
//                            padding: 2px 5px;
//                        }
//                    )");
//                    rightLayout->addWidget(lineEdit1);
//                    createdWidget = lineEdit1;
//                    // // 连接 textChanged 信号到 lambda 函数
//                    connect(lineEdit1, &QLineEdit::textChanged, [this,lineEdit1,fieldTableName,fieldId]() {
//                        updateDb(fieldTableName,fieldId,lineEdit1->text());
//                        loginput(fieldTableName,fieldId,lineEdit1->text());
//                    });
//                }
//            }
//            else if (fieldType == "radio") {
//                // 用逗号分隔的选项
//                QStringList optionList = fieldValue.split(QRegExp("[,，]"), Qt::SkipEmptyParts);
//                QHBoxLayout *radioLayout = new QHBoxLayout;
//                radioLayout->setSpacing(5);
//                QButtonGroup *radioGroup = new QButtonGroup(rightWidget);
//                for (const QString &optionText : optionList) {
//                    QString trimmedOpt = optionText.trimmed();
//                    if (trimmedOpt.isEmpty()) continue;
//                    QRadioButton *radioButton = new QRadioButton(trimmedOpt);
//                    radioGroup->addButton(radioButton);
//                    radioLayout->addWidget(radioButton);
//                    m_fieldWidgets.append(radioButton);
//                    if(fieldValue == trimmedOpt){
//                        radioButton->setChecked(true);
//                    }
//                }
//                // 使用Lambda函数连接 buttonToggled 信号
//                connect(radioGroup, static_cast<void (QButtonGroup::*)(QAbstractButton *, bool)>(&QButtonGroup::buttonToggled),[this,fieldTableName,fieldId](QAbstractButton *button,bool checked) {
//                    if (checked) {
//                        // qDebug() << "Button toggled:" << button->text();
//                        // 在这里添加你想要执行的操作
//                        updateDb(fieldTableName,fieldId,button->text());
//                    }
//                });
//                rightLayout->addLayout(radioLayout);
//            }
//            else if (fieldType == "checkbox") {
//                bool isChecked;
//                if(fieldValue == ""){
//                    isChecked = (fieldValue == "1");
//                }else{
//                    isChecked = (fieldValue == "1");
//                }
//
//                QCheckBox *checkBox = new QCheckBox;
//                checkBox->setChecked(isChecked);
//                checkBox->setStyleSheet(R"(
//                    QCheckBox::indicator {
//                        width: 20px;
//                        height: 20px;
//                    }
//                    QCheckBox::indicator:unchecked {
//                        background-color: #FFFFFF;
//                        border: 1px solid #BABBDC;
//                        border-radius: 2px;
//                    }
//                    QCheckBox::indicator:checked {
//                        image: url(:/images/three_Selecte.png);
//                    }
//                    QCheckBox {
//                        spacing: 0px;
//                    }
//                )");
//                rightLayout->addWidget(checkBox);
//                createdWidget = checkBox;
//                connect(checkBox, &QCheckBox::stateChanged, [this,fieldTableName,fieldId](int state) {
//                    if (state == Qt::Checked) {
//                        // qDebug() << "CheckBox is checked"<<fieldId;
//                        updateDb(fieldTableName,fieldId,"1");
//                    } else if (state == Qt::Unchecked) {
//                        // qDebug() << "CheckBox is unchecked"<<fieldId;
//                        // 在这里添加你想要执行的操作
//                        updateDb(fieldTableName,fieldId,"0");
//                    } else if (state == Qt::PartiallyChecked) {
//                        qDebug() << "CheckBox is partially checked";
//                        // 在这里添加你想要执行的操作
//                    }
//                });
//            }
//            else if (fieldType == "ComboBox") {
//                QStringList optionList = fieldValue.split(QRegExp("[,，]"), Qt::SkipEmptyParts);
//                QComboBox *comboBox = new QComboBox;
//                comboBox->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
//                comboBox->setFixedSize(140, 28);
//                comboBox->setStyleSheet(R"(
//                    QComboBox {
//                        background: #FFFFFF;
//                        border: 1px solid #BABBDC;
//                        border-radius: 6px;
//                        padding: 2px 5px;
//                    }
//                    QComboBox::drop-down {
//                        width: 20px;
//                    }
//                )");
//                // int newIndex = -1;
//                for (const QString &opt : optionList) {
//                    QString trimmedOpt = opt.trimmed();
//                    if (!trimmedOpt.isEmpty())
//                        comboBox->addItem(trimmedOpt);
//                }
//                if(fieldValue == ""){
//                    comboBox->setCurrentIndex(0);
//                }else{
//                    comboBox->setCurrentIndex(fieldValue.toInt());
//                }
//                rightLayout->addWidget(comboBox);
//                createdWidget = comboBox;
//                // 使用Lambda函数连接 currentIndexChanged 信号
//                connect(comboBox, QOverload<int>::of(&QComboBox::currentIndexChanged), [this,comboBox,fieldTableName,fieldId](int index) {
//                    QString selectedText = comboBox->itemText(index);
//                    QString indexString = QString::number(index);
//                    // qDebug() << "ComboBox index changed to:" << index << "Text:" << selectedText;
//                    updateDb(fieldTableName,fieldId,indexString);
//                    // 在这里添加你想要执行的操作
//                });
//            }
//            else if (fieldType == "time") {
//                QTimeEdit *timeEdit = new QTimeEdit;
//                timeEdit->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
//                timeEdit->setFixedSize(120, 28);
//                timeEdit->setStyleSheet(R"(
//                    QTimeEdit {
//                        background: #FFFFFF;
//                        border: 1px solid #BABBDC;
//                        border-radius: 6px;
//                        padding: 2px 5px;
//                    }
//                )");
//                timeEdit->setDisplayFormat("HH:mm:ss");
//                timeEdit->setTime(QTime::fromString(fieldValue, "HH:mm:ss"));
//                rightLayout->addWidget(timeEdit);
//                createdWidget = timeEdit;
//            }
//            else if (fieldType == "switch") {
//                QWidget *switchContainer = new QWidget;
//                QHBoxLayout *switchLayout = new QHBoxLayout(switchContainer);
//                switchLayout->setSpacing(5);
//                switchLayout->setContentsMargins(0, 0, 0, 0);
//                QCheckBox *switchBox = new QCheckBox;
//                switchBox->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
//                switchBox->setFixedSize(30, 30);
//                switchBox->setStyleSheet(R"(
//                    QCheckBox::indicator {
//                        width: 30px;
//                        height: 30px;
//                    }
//                    QCheckBox::indicator:unchecked {
//                        background-color: #BABBDC;
//                        border-radius: 6px;
//                    }
//                    QCheckBox::indicator:checked {
//                        background-color: #4CAF50;
//                        border-radius: 6px;
//                    }
//                )");
//                QString switchValue;
//
//                if(fieldValue ==""){
//                    switchValue = fieldValue.toLower();
//                }else{
//                    switchValue = fieldValue.toLower();
//                }
//                if (switchValue == "on")
//                    switchBox->setChecked(true);
//                else
//                    switchBox->setChecked(false);
//                QLabel *switchLabel = new QLabel(switchBox->isChecked() ? "开" : "关");
//                switchLabel->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
//                switchLabel->setStyleSheet("font-size: 14px;");
//                connect(switchBox, &QCheckBox::stateChanged, [fieldTableName,fieldId,switchLabel, this](int state){
//                    if (state == Qt::Checked){
//                        switchLabel->setText("开");
//                        updateDb(fieldTableName,fieldId,"on");
//                    }else{
//                        switchLabel->setText("关");
//                        updateDb(fieldTableName,fieldId,"off");
//                    }
//                });
//                switchLayout->addWidget(switchBox);
//                switchLayout->addWidget(switchLabel);
//                rightLayout->addWidget(switchContainer);
//                createdWidget = switchBox;
//            }
//            else if (fieldType == "combined") {
//                // 用逗号分隔
//                QStringList parts = fieldValue.split(QRegExp("[,，]"), Qt::SkipEmptyParts);
//                QString inputText   = (parts.size() >= 1 ? parts.at(0).trimmed() : QString());
//                QString button1Text = (parts.size() >= 2 ? parts.at(1).trimmed() : QStringLiteral("获取"));
//                QString button2Text = (parts.size() >= 3 ? parts.at(2).trimmed() : QStringLiteral("设置"));
//
//                QLineEdit *comboInput = new QLineEdit(inputText);
//                comboInput->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
//                comboInput->setFixedHeight(28);
//                comboInput->setStyleSheet(R"(
//                    QLineEdit {
//                        background: #FFFFFF;
//                        border: 1px solid #BABBDC;
//                        border-radius: 5px;
//                        padding: 2px 5px;
//                    }
//                )");
//                m_fieldWidgets.append(comboInput);
//
//                QWidget *combinedWidget = new QWidget;
//                QHBoxLayout *combinedLayout = new QHBoxLayout(combinedWidget);
//                combinedLayout->setSpacing(5);
//                combinedLayout->setContentsMargins(0, 0, 0, 0);
//
//                QPushButton *btnGet = new QPushButton(button1Text, combinedWidget);
//                btnGet->setFixedSize(80, 28);
//                btnGet->setStyleSheet(R"(
//                    QPushButton {
//                        background: #FFFFFF;
//                        border: 1px solid #BABBDC;
//                        border-radius: 5px;
//                    }
//                    QPushButton:hover {
//                        background-color: #F0F0F0;
//                    }
//                )");
//                m_fieldWidgets.append(btnGet);
//
//                QPushButton *btnSet = new QPushButton(button2Text, combinedWidget);
//                btnSet->setFixedSize(80, 28);
//                btnSet->setStyleSheet(R"(
//                    QPushButton {
//                        background: #FFFFFF;
//                        border: 1px solid #BABBDC;
//                        border-radius: 5px;
//                    }
//                    QPushButton:hover {
//                        background-color: #F0F0F0;
//                    }
//                )");
//                m_fieldWidgets.append(btnSet);
//
//                combinedLayout->addWidget(comboInput);
//                combinedLayout->addWidget(btnGet);
//                combinedLayout->addWidget(btnSet);
//                combinedLayout->addStretch();
//                rightLayout->addWidget(combinedWidget);
//            }
//            else if (fieldType == "Text")
//            {
//                QLabel* label = new QLabel();
//                label->setText(fieldValue);
//                label->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
//                label->setFixedHeight(24);
//                label->setMinimumWidth(120);
//                rightLayout->addWidget(label);
//
//            } else
//            {
//                qWarning() << "未知字段类型：" << fieldType;
//            }
//
//            if (createdWidget)
//                m_fieldWidgets.append(createdWidget);
//
//            fieldLayout->addWidget(rightWidget);
//            scrollLayout->addLayout(fieldLayout);
//        }
//    }
//
//    scrollLayout->addStretch();
//
//    scrollArea->setWidget(scrollWidget);
//
//    QVBoxLayout *mainLayout = new QVBoxLayout(m_thirdLevelFieldWnd);
//    mainLayout->setContentsMargins(0, 0, 0, 0);
//    mainLayout->addWidget(scrollArea);
//
//    m_thirdLevelFieldWnd->show();
//}


QString extractBeforeComma(const QString& input)
{
    int commaPos = input.indexOf(',');
    if (commaPos != -1) {
        return input.left(commaPos);
    }
    return input;
}

void DbTreeViewManager::displayThirdLevelFields(const QList<Table_Control_Data>& data, bool allChangeFlag, bool isHome)
{
    if (data.isEmpty())
    {
        qWarning() << "字段数据为空，无法显示";
        return;
    }
    //遍历得到结果allChangeFalg

    // 若已有第三层窗口，先关闭并释放
    if (m_thirdLevelFieldWnd)
    {
        m_thirdLevelFieldWnd->close();
        m_thirdLevelFieldWnd->deleteLater();
        m_thirdLevelFieldWnd = nullptr;
    }

    // 获取当前选中的目录项，设置状态
    QModelIndex currentIndex = m_pTreeViewDown->currentIndex();
    if (currentIndex.isValid())
    {
        QStandardItem* currentItem = m_pCModel->itemFromIndex(currentIndex);
        if (currentItem)
        {
            currentItem->setCheckState(allChangeFlag ? Qt::Checked : Qt::Unchecked);
            qDebug() << "设置当前目录项复选框状态为：" << (allChangeFlag ? "Checked" : "Unchecked");
        }
    } else
    {
        qWarning() << "当前没有选中的目录项";
    }

    // 隐藏目录树及所有分隔线
    m_pTreeViewDown->hide();
    for (auto separator : firstLevelSeparators)
    {
        if (separator)
            separator->hide();
    }

    // 清理之前的控件列表
    m_fieldWidgets.clear();

    // 创建新的 "字段展示" 窗口，并赋值给 m_thirdLevelFieldWnd
    m_thirdLevelFieldWnd = new QWidget(m_pOriginalWndMenuPage);
    m_thirdLevelFieldWnd->setWindowTitle("字段展示");
    m_thirdLevelFieldWnd->setStyleSheet("background-color: transparent;");
    if (isHome)
    {
        // Home 界面，填满 widget2
        m_thirdLevelFieldWnd->setGeometry(0, 0, m_pOriginalWndMenuPage->width(), m_pOriginalWndMenuPage->height());
    } else
    {
        // 其他配置界面，设置与 treeViewDown 相同的几何位置
        m_thirdLevelFieldWnd->setGeometry(m_pTreeViewDown->geometry());
    }

    // 创建滚动区域
    QScrollArea* scrollArea = new QScrollArea(m_thirdLevelFieldWnd);
    scrollArea->setWidgetResizable(true);
    scrollArea->setHorizontalScrollBarPolicy(Qt::ScrollBarAsNeeded);

    // 创建滚动容器并设置布局
    QWidget* scrollWidget = new QWidget;
    scrollWidget->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Preferred);
    QVBoxLayout* scrollLayout = new QVBoxLayout(scrollWidget);
    scrollLayout->setSpacing(10);
    scrollLayout->setContentsMargins(10, 10, 10, 10);

    //不同表格的全部插进来
    int previousGroupId = -1;
    QList<CONFIG_BASE_STRUCT> buttonControls;
    for (const Table_Control_Data& tableData : data)
    {
        //遍历控件list
        for (const CONFIG_BASE_STRUCT& control : tableData.controlDataList)
        {
            //判断特殊的按钮控件
            if (control.strType == "Button")
            {
                buttonControls.append(control);
            } 
            else
            {
                //先创建label
                //int fieldId = control.iId;
                QString fieldName = QString::fromStdString(control.strName);
                QString fieldDescribe = QString::fromStdString(control.strDescribe);
                QString fieldType = QString::fromStdString(control.strType);
                QString fieldValue = QString::fromStdString(control.strValue);
                QString fieldUpLimit = QString::fromStdString(control.strUpperLimit);
                QString fieldDownLimit = QString::fromStdString(control.strLowerLimit);
                QString fieldUnits = QString::fromStdString(control.strUnit);
                QString strAxisType = QString::fromStdString(control.strAxisType);
                QString strstrModuleType = m_strModuleTypeAAA;
                int groupId = control.iGroupId;

                QString fieldTableName = extractBeforeComma(tableData.tableName);

                // 如果组变化，插入分隔线
                if (previousGroupId != -1 && groupId != previousGroupId)
                {
                    QFrame* separator = createUnifiedSeparator(scrollWidget, 2);
                    QHBoxLayout* separatorLayout = new QHBoxLayout;
                    separatorLayout->setContentsMargins(0, 5, 0, 5);
                    separatorLayout->addWidget(separator);
                    scrollLayout->addLayout(separatorLayout);
                    separator->show();
                }
                previousGroupId = groupId;

                // 每个字段一行
                QHBoxLayout* fieldLayout = new QHBoxLayout;
                fieldLayout->setSpacing(5);

                QLabel* label = new QLabel(fieldDescribe);
                label->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
                label->setFixedHeight(24);
                label->setMinimumWidth(120);
                fieldLayout->addWidget(label);
                fieldLayout->addStretch(1);

                QWidget* rightWidget = new QWidget;
                QHBoxLayout* rightLayout = new QHBoxLayout(rightWidget);
                rightLayout->setContentsMargins(0, 0, 20, 0);
                rightLayout->setSpacing(5);

                QWidget* createdWidget = nullptr;

                if (fieldType == "input" || fieldType == "LONG" || fieldType == "STRING")
                {
                    // 检查 Value 中是否包含逗号分隔（比如 "请输入内容1,分钟"）
                    if (fieldUnits != "")
                    {
                        // // 采用逗号分割，trim去除空白
                        // QStringList parts = fieldValue.split(",", Qt::SkipEmptyParts);
                        // QString leftText = parts.at(0).trimmed();
                        // QString rightText = (parts.size() > 1 ? parts.at(1).trimmed() : QString());

                        // 创建 QLineEdit 显示左边文本
                        QLineEdit* lineEdit = new QLineEdit();
                        if ((fieldUpLimit == "") && (fieldDownLimit == ""))
                        {
                            lineEdit->setText(fieldValue);
                            lineEdit->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
                            lineEdit->setFixedSize(105, 28);
                            lineEdit->setAlignment(Qt::AlignLeft);
                            //！！！提到前面
                            lineEdit->setStyleSheet(R"(
                        QLineEdit {
                            background: #FFFFFF;
                            border: 1px solid #BABBDC;
                            border-radius: 6px;
                            padding: 2px 5px;
                        }
                    )");
                        } else
                        {//上下限至少设置了一个值
                            if (fieldValue == "")
                            {
                                lineEdit->setPlaceholderText(tr("请输入数字"));
                            } else
                            {
                                lineEdit->setText(fieldValue);
                            }


                            lineEdit->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
                            lineEdit->setFixedSize(105, 28);
                            lineEdit->setAlignment(Qt::AlignLeft);
                            lineEdit->setStyleSheet(R"(
                        QLineEdit {
                            background: #FFFFFF;
                            border: 1px solid #BABBDC;
                            border-radius: 6px;
                            padding: 2px 5px;
                        }
                    )");
                        }

                        // 创建 QLabel 显示右边文本（比如 "分钟"）
                        QLabel* unitLabel = new QLabel(fieldUnits);
                        unitLabel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                        unitLabel->setFixedHeight(28);
                        unitLabel->setStyleSheet("QLabel { font-size: 14px; }");

                        // 把 QLineEdit 和 QLabel 水平排列，确保 Qlabel 显示在 QLineEdit 右侧
                        QHBoxLayout* inputLayout = new QHBoxLayout;
                        inputLayout->setSpacing(10);
                        inputLayout->setContentsMargins(0, 0, 0, 0);
                        inputLayout->addWidget(lineEdit);
                        inputLayout->addWidget(unitLabel);

                        // 用一个容器部件来装下这个布局
                        QWidget* inputWidget = new QWidget;
                        inputWidget->setLayout(inputLayout);
                        rightLayout->addWidget(inputWidget);

                        // 保存控件指针到 m_fieldWidgets（可选）
                        m_fieldWidgets.append(lineEdit);
                        m_fieldWidgets.append(unitLabel);
                        createdWidget = inputWidget;
                        // // 连接 textChanged 信号到 lambda 函数
                        connect(lineEdit, &QLineEdit::textChanged, [this, lineEdit, fieldTableName, fieldName, fieldUpLimit, fieldDownLimit]() {
                            if ((fieldUpLimit != "") && (fieldDownLimit != ""))
                            {
                                int uplimit = fieldUpLimit.toInt();
                                int downlimit = fieldDownLimit.toInt();
                                int inputvalue = (lineEdit->text()).toInt();
                                if ((inputvalue <= uplimit) && (inputvalue >= downlimit))
                                {
                                    m_sqlOper->updateControlData(fieldTableName, fieldName, lineEdit->text());
                                    //updateDb(fieldTableName, fieldId, lineEdit->text());
                                } else
                                {
                                    lineEdit->setPlaceholderText(tr("超出设定范围，请重新输入"));
                                }
                            } else if (fieldDownLimit != "")
                            {
                                int downlimit = fieldDownLimit.toInt();
                                int inputvalue = (lineEdit->text()).toInt();
                                if (inputvalue >= downlimit)
                                {
                                    m_sqlOper->updateControlData(fieldTableName, fieldName, lineEdit->text());
                                    //updateDb(fieldTableName, fieldId, lineEdit->text());
                                } else
                                {
                                    lineEdit->setPlaceholderText(tr("超出设定范围，请重新输入"));
                                }
                            } else if (fieldUpLimit != "")
                            {
                                int uplimit = fieldUpLimit.toInt();
                                int inputvalue = (lineEdit->text()).toInt();
                                if (inputvalue <= uplimit)
                                {
                                    m_sqlOper->updateControlData(fieldTableName, fieldName, lineEdit->text());
                                    //updateDb(fieldTableName, fieldId, lineEdit->text());
                                } else
                                {
                                    lineEdit->setPlaceholderText(tr("超出设定范围，请重新输入"));
                                }
                            } else
                            {
                                m_sqlOper->updateControlData(fieldTableName, fieldName, lineEdit->text());
                                //updateDb(fieldTableName, fieldId, lineEdit->text());
                            }

                            });
                    } 
                    else
                    {
                        // 如果不包含逗号，按原有逻辑只创建 QLineEdit
                        QLineEdit* lineEdit1 = new QLineEdit(fieldValue);
                        lineEdit1->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
                        lineEdit1->setFixedSize(140, 28);
                        lineEdit1->setAlignment(Qt::AlignLeft);
                        lineEdit1->setStyleSheet(R"(
                        QLineEdit {
                            background: #FFFFFF;
                            border: 1px solid #BABBDC;
                            border-radius: 6px;
                            padding: 2px 5px;
                        }
                    )");
                        rightLayout->addWidget(lineEdit1);
                        createdWidget = lineEdit1;
                        // // 连接 textChanged 信号到 lambda 函数
                        connect(lineEdit1, &QLineEdit::textChanged, [this, lineEdit1, fieldTableName, fieldName]() {
                            m_sqlOper->updateControlData(fieldTableName, fieldName, lineEdit1->text());
                            //updateDb(fieldTableName, fieldId, lineEdit1->text());
                            loginput(fieldTableName, fieldName, lineEdit1->text());
                            });
                    }
                } 
                else if (fieldType == "radio")
                {
                    // 用逗号分隔的选项
                    QStringList optionList = fieldUnits.split(QRegExp("[,，]"), Qt::SkipEmptyParts);
                    QHBoxLayout* radioLayout = new QHBoxLayout;
                    radioLayout->setSpacing(5);
                    QButtonGroup* radioGroup = new QButtonGroup(rightWidget);
                    for (const QString& optionText : optionList)
                    {
                        QString trimmedOpt = optionText.trimmed();
                        if (trimmedOpt.isEmpty()) continue;
                        QRadioButton* radioButton = new QRadioButton(trimmedOpt);
                        radioGroup->addButton(radioButton);
                        radioLayout->addWidget(radioButton);
                        m_fieldWidgets.append(radioButton);
                        if (fieldValue == trimmedOpt)
                        {
                            radioButton->setChecked(true);
                        }
                    }
                    // 使用Lambda函数连接 buttonToggled 信号
                    connect(radioGroup, static_cast<void (QButtonGroup::*)(QAbstractButton*, bool)>(&QButtonGroup::buttonToggled), [this, fieldTableName, fieldName](QAbstractButton* button, bool checked) {
                        if (checked)
                        {
                            // qDebug() << "Button toggled:" << button->text();
                            // 在这里添加你想要执行的操作
                            m_sqlOper->updateControlData(fieldTableName, fieldName, button->text());
                            //updateDb(fieldTableName, fieldId, button->text());
                        }
                        });
                    rightLayout->addLayout(radioLayout);
                } 
                else if (fieldType == "checkbox" || fieldType == "BOOL")
                {
                    bool isChecked;
                    if (fieldValue == "")
                    {
                        isChecked = (fieldValue == "1");
                    } else
                    {
                        isChecked = (fieldValue == "1");
                    }

                    QCheckBox* checkBox = new QCheckBox;
                    checkBox->setChecked(isChecked);
                    checkBox->setStyleSheet(R"(
                    QCheckBox::indicator {
                        width: 20px;
                        height: 20px;
                    }
                    QCheckBox::indicator:unchecked {
                        background-color: #FFFFFF;
                        border: 1px solid #BABBDC;
                        border-radius: 2px;
                    }
                    QCheckBox::indicator:checked {
                        image: url(:/images/three_Selecte.png);
                    }
                    QCheckBox {
                        spacing: 0px;
                    }
                )");
                    rightLayout->addWidget(checkBox);
                    createdWidget = checkBox;
                    connect(checkBox, &QCheckBox::stateChanged, [this, fieldTableName, fieldName](int state) {
                        if (state == Qt::Checked)
                        {
                            // qDebug() << "CheckBox is checked"<<fieldId;
                            m_sqlOper->updateControlData(fieldTableName, fieldName, "1");
                            //updateDb(fieldTableName, fieldId, "1");
                        } else if (state == Qt::Unchecked)
                        {
                            // qDebug() << "CheckBox is unchecked"<<fieldId;
                            // 在这里添加你想要执行的操作
                            m_sqlOper->updateControlData(fieldTableName, fieldName, "0");
                            //updateDb(fieldTableName, fieldId, "0");
                        } else if (state == Qt::PartiallyChecked)
                        {
                            qDebug() << "CheckBox is partially checked";
                            // 在这里添加你想要执行的操作
                        }
                        });
                } 
                else if (fieldType == "ComboBox")
                {
                    QStringList optionList = fieldValue.split(QRegExp("[,，]"), Qt::SkipEmptyParts);
                    QComboBox* comboBox = new QComboBox;
                    comboBox->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                    comboBox->setFixedSize(140, 28);
                    comboBox->setStyleSheet(R"(
                    QComboBox {
                        background: #FFFFFF;
                        border: 1px solid #BABBDC;
                        border-radius: 6px;
                        padding: 2px 5px;
                    }
                    QComboBox::drop-down {
                        width: 20px;
                    }
                )");
                    // int newIndex = -1;
                    for (const QString& opt : optionList)
                    {
                        QString trimmedOpt = opt.trimmed();
                        if (!trimmedOpt.isEmpty())
                            comboBox->addItem(trimmedOpt);
                    }
                    if (fieldValue == "")
                    {
                        comboBox->setCurrentIndex(0);
                    } else
                    {
                        comboBox->setCurrentIndex(fieldValue.toInt());
                    }
                    rightLayout->addWidget(comboBox);
                    createdWidget = comboBox;
                    // 使用Lambda函数连接 currentIndexChanged 信号
                    connect(comboBox, QOverload<int>::of(&QComboBox::currentIndexChanged), [this, comboBox, fieldTableName, fieldName](int index) {
                        QString selectedText = comboBox->itemText(index);
                        QString indexString = QString::number(index);
                        // qDebug() << "ComboBox index changed to:" << index << "Text:" << selectedText;
                        m_sqlOper->updateControlData(fieldTableName, fieldName, indexString);
                        //updateDb(fieldTableName, fieldId, indexString);
                        // 在这里添加你想要执行的操作
                        });
                } else if (fieldType == "time")
                {
                    QTimeEdit* timeEdit = new QTimeEdit;
                    timeEdit->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                    timeEdit->setFixedSize(120, 28);
                    timeEdit->setStyleSheet(R"(
                    QTimeEdit {
                        background: #FFFFFF;
                        border: 1px solid #BABBDC;
                        border-radius: 6px;
                        padding: 2px 5px;
                    }
                )");
                    timeEdit->setDisplayFormat("HH:mm:ss");
                    timeEdit->setTime(QTime::fromString(fieldValue, "HH:mm:ss"));
                    rightLayout->addWidget(timeEdit);
                    createdWidget = timeEdit;
                } else if (fieldType == "switch")
                {
                    QWidget* switchContainer = new QWidget;
                    QHBoxLayout* switchLayout = new QHBoxLayout(switchContainer);
                    switchLayout->setSpacing(5);
                    switchLayout->setContentsMargins(0, 0, 0, 0);
                    QCheckBox* switchBox = new QCheckBox;
                    switchBox->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                    switchBox->setFixedSize(30, 30);
                    switchBox->setStyleSheet(R"(
                    QCheckBox::indicator {
                        width: 30px;
                        height: 30px;
                    }
                    QCheckBox::indicator:unchecked {
                        background-color: #BABBDC;
                        border-radius: 6px;
                    }
                    QCheckBox::indicator:checked {
                        background-color: #4CAF50;
                        border-radius: 6px;
                    }
                )");
                    QString switchValue;

                    if (fieldValue == "")
                    {
                        switchValue = fieldValue.toLower();
                    } else
                    {
                        switchValue = fieldValue.toLower();
                    }
                    if (switchValue == "on")
                        switchBox->setChecked(true);
                    else
                        switchBox->setChecked(false);
                    QLabel* switchLabel = new QLabel(switchBox->isChecked() ? tr("开") :tr("关"));
                    switchLabel->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
                    switchLabel->setStyleSheet("font-size: 14px;");
                    connect(switchBox, &QCheckBox::stateChanged, [fieldTableName, fieldName, switchLabel, this](int state) {
                        if (state == Qt::Checked)
                        {
                            switchLabel->setText(tr("开"));
                            m_sqlOper->updateControlData(fieldTableName, fieldName, "on");
                            //updateDb(fieldTableName, fieldId, "on");
                        } else
                        {
                            switchLabel->setText(tr("关"));
                            m_sqlOper->updateControlData(fieldTableName, fieldName, "off");
                            //updateDb(fieldTableName, fieldId, "off");
                        }
                        });
                    switchLayout->addWidget(switchBox);
                    switchLayout->addWidget(switchLabel);
                    rightLayout->addWidget(switchContainer);
                    createdWidget = switchBox;
                } 
                else if (fieldType == "combined" || fieldType == "POSITION")
                {

                    // 用逗号分隔
                    QStringList parts = fieldValue.split(QRegExp("[,，]"), Qt::SkipEmptyParts);
                    QString inputText = (parts.size() >= 1 ? parts.at(0).trimmed() : QString());
                    QString button1Text = (parts.size() >= 2 ? parts.at(1).trimmed() : QStringLiteral("获取"));
                    QString button2Text = (parts.size() >= 3 ? parts.at(2).trimmed() : QStringLiteral("设置"));

                    QLineEdit* comboInput = new QLineEdit(inputText);
                    QRegularExpression regExp("^-?\\d*\\.?\\d*");  // 匹配整数/浮点数（含负数）
                    QRegularExpressionValidator* validator = new QRegularExpressionValidator(regExp, this);
                    comboInput->setValidator(validator);
                    QString strID = fieldTableName;
                    strID += "_";
                    strID += fieldName;
                    strID += +"_";
                    strID += fieldDescribe;

                    comboInput->setProperty("Input", strID);
                    comboInput->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
                    comboInput->setFixedHeight(28);
                    comboInput->setStyleSheet(R"(
                    QLineEdit {
                        background: #FFFFFF;
                        border: 1px solid #BABBDC;
                        border-radius: 5px;
                        padding: 2px 5px;
                    }
                )");
                    m_fieldWidgets.append(comboInput);

                    QWidget* combinedWidget = new QWidget;
                    QHBoxLayout* combinedLayout = new QHBoxLayout(combinedWidget);
                    combinedLayout->setSpacing(5);
                    combinedLayout->setContentsMargins(0, 0, 0, 0);

                    QPushButton* btnGet = new QPushButton(button1Text, combinedWidget);
                    QString strIDGet = fieldTableName;
                    strIDGet += "_";
                    strIDGet += fieldName;
                    strIDGet += +"_";
                    strIDGet += fieldDescribe;

                    btnGet->setProperty("Get", strIDGet);
                    btnGet->setFixedSize(80, 28);
                    btnGet->setStyleSheet(R"(
                    QPushButton {
                        background: #FFFFFF;
                        border: 1px solid #BABBDC;
                        border-radius: 5px;
                    }
                    QPushButton:hover {
                        background-color: #F0F0F0;
                    }
                )");
               connect(btnGet, &QPushButton::clicked, this, [this, comboInput, strstrModuleType, btnGet, strAxisType,fieldTableName, fieldName]()
                   {
                       double strNum = comboInput->text().toDouble();
                       //qDebug() << "AAA:" << strstrModuleType << strAxisType <<"   " << fieldTableName << fieldName;
                       //
                       if (m_pTreeCViewInterface)
                       {
                           m_pTreeCViewInterface->GetAxisPosition(strstrModuleType.toStdString(),
                               strAxisType.toStdString(), strNum);
                       }
                       
                       comboInput->text() = strNum;
                       //QPushButton* senderBtn = qobject_cast<QPushButton*>(sender());
                       //if (senderBtn) {
                       //    QString strOnclick = senderBtn->property("Get").toString();
                       //    qDebug() << "Clicked ID:" << strOnclick;
                       //}
                       // JMessageTip::Message_question(m_veCombinedCont[0].pLineC->text());
                   });


                    m_fieldWidgets.append(btnGet);

                    QPushButton* btnSet = new QPushButton(button2Text, combinedWidget);
                    QString strIDSet = fieldTableName;
                    strIDSet += "_";
                    strIDSet += fieldName;
                    strIDSet += +"_";
                    strIDSet += fieldDescribe;

                    btnSet->setProperty("set", strIDSet);

                    btnSet->setFixedSize(80, 28);
                    btnSet->setStyleSheet(R"(
                    QPushButton {
                        background: #FFFFFF;
                        border: 1px solid #BABBDC;
                        border-radius: 5px;
                    }
                    QPushButton:hover {
                        background-color: #F0F0F0;
                    }
                )");

                    connect(btnSet, &QPushButton::clicked, this, [this, comboInput, strstrModuleType, btnGet, strAxisType, fieldTableName, fieldName]()
                        {
                            QPushButton* senderBtn = qobject_cast<QPushButton*>(sender());
                            if (senderBtn) {
                                QString strOnclick = senderBtn->property("set").toString();
                                qDebug() << "btnSet ID:" << strOnclick;
                            }
                            double strNum = comboInput->text().toDouble();
                            if (m_pTreeCViewInterface)
                            {
                                m_pTreeCViewInterface->ModuleMoveTo(strstrModuleType.toStdString(),
                                    strAxisType.toStdString(), strNum);
                            }
                            //JMessageTip::Message_question(m_veCombinedCont[0].pLineC->text());
                        });
                    m_fieldWidgets.append(btnSet);

                    combinedLayout->addWidget(comboInput);
                    combinedLayout->addWidget(btnGet);
                    combinedLayout->addWidget(btnSet);
                    combinedLayout->addStretch();
                    rightLayout->addWidget(combinedWidget);

                    // 压入内存
                    ST_COMBINED_CONT _a;
                    _a.pGetBut = btnGet;
                    _a.pSetBut = btnSet;
                    _a.pLineC = comboInput;
                    _a.strConfigurationsName = fieldTableName;
                    _a.strfieldName = fieldName;
                    _a.strfieldDescribe = fieldDescribe;

                    m_veCombinedCont.push_back(_a);



                } else if (fieldType == "Text")
                {
                    QLabel* label = new QLabel();
                    label->setText(fieldValue);
                    label->setAlignment(Qt::AlignVCenter | Qt::AlignLeft);
                    label->setFixedHeight(24);
                    label->setMinimumWidth(120);
                    rightLayout->addWidget(label);

                } else
                {
                    qWarning() << "未知字段类型：" << fieldType;
                }

                if (createdWidget)
                    m_fieldWidgets.append(createdWidget);

                fieldLayout->addWidget(rightWidget);
                scrollLayout->addLayout(fieldLayout);

            }
        }
    }

    scrollLayout->addStretch();
    scrollArea->setWidget(scrollWidget);

    QVBoxLayout* mainLayout = new QVBoxLayout(m_thirdLevelFieldWnd);
    mainLayout->setContentsMargins(0, 0, 0, 0);
    mainLayout->addWidget(scrollArea);

    m_thirdLevelFieldWnd->show();


    // 显示按钮
    displayThirdLevelButtons(buttonControls);
    //loadButtonConfigForThirdLevel(data);

}




void DbTreeViewManager::updateParentCheckState(QStandardItem *item)
{
    if (!item)
        return;

    QStandardItem *parentItem = item->parent();
    if (!parentItem)
        return;

    bool allChecked = true;
    bool noneChecked = true;

    for (int i = 0; i < parentItem->rowCount(); ++i) {
        QStandardItem *child = parentItem->child(i);
        if (child->checkState() != Qt::Checked) {
            allChecked = false;
        }
        if (child->checkState() == Qt::Checked) {
            noneChecked = false;
        }
    }

    if (allChecked) {
        parentItem->setCheckState(Qt::Checked);
    } else {
        parentItem->setCheckState(Qt::Unchecked);
    }

    if (noneChecked) {
        qDebug() << "noneChecked状态为：" << noneChecked;

    }

    // 递归更新上一级
    updateParentCheckState(parentItem);
}


void DbTreeViewManager::onButtonBackClicked()
{

    if (m_thirdLevelFieldWnd) {
        // 当前在第三层目录，返回到上一层目录
        qDebug() << "当前在第三层目录，准备返回上一层。";
        for(int i=0;i<5;i++){
            if(currentMenuId == menuArray[i].menuId){
                menuArray[i].isthird = false;
            }
        }
        // 关闭并销毁字段展示窗口
        m_thirdLevelFieldWnd->close();
        m_thirdLevelFieldWnd->deleteLater();
        m_thirdLevelFieldWnd = nullptr;

        // 显示目录树和分隔线
        m_pTreeViewDown->show();
        for (auto separator : firstLevelSeparators) {
            if (separator)
                separator->show();
        }

        // 获取当前导航路径
        QStringList path;
        QLayout* layout = m_pNavigationWidget->layout();
        if (!layout) {
            qWarning() << "导航栏没有布局，无法获取路径。";
            return;
        }
        for (int i = 0; i < layout->count(); ++i) {
            QLayoutItem* item = layout->itemAt(i);
            if (item && item->widget()) {
                QLabel* label = qobject_cast<QLabel*>(item->widget());
                if (label) {
                    QString text = label->text().trimmed();
                    if (!text.isEmpty()) {
                        path << text;
                    }
                }
            }
        }

        if (path.isEmpty()) {
            qWarning() << "导航路径为空，无法返回上一层。";
            return;
        }

        // 移除最后一个目录名称以返回上一层
        path.removeLast();

        if (path.isEmpty()) {
            qDebug() << "已经在根目录，无法返回。";
            return;
        }

        // 根据新的路径查找对应的 QModelIndex
        QModelIndex parentIndex = findItemByPath(path);
        if (!parentIndex.isValid()) {
            qWarning() << "无法找到路径对应的目录项：" << path;
            return;
        }

        // 选中父目录项
        m_pTreeViewDown->setCurrentIndex(parentIndex);
        m_pTreeViewDown->scrollTo(parentIndex);

        // 更新导航栏
        updateNavigationBar(parentIndex);

        // 检查父目录是否为第三层目录
        QStandardItem* parentItem = m_pCModel->itemFromIndex(parentIndex);
        if (!parentItem) {
            qWarning() << "父目录项无效。";
            return;
        }

        QVariant dataVar = parentItem->data(Qt::UserRole + 2);
        bool isThirdLevel = false;
        int directoryId = -1;
        QString multiTableName = "";
        if (dataVar.canConvert<QJsonObject>()) {
            QJsonObject dataObj = dataVar.toJsonObject();
            if (dataObj.contains("IsThirdLevel") && dataObj["IsThirdLevel"].toBool()) {
                isThirdLevel = true;
                if (dataObj.contains("Id")) {
                    directoryId = dataObj["Id"].toInt();
                }
                if (dataObj.contains("TableName"))
                {
                    multiTableName = dataObj["TableName"].toString();
                }
            }
        }

        if (isThirdLevel) {
            if (directoryId == -1) {
                qWarning() << "无效的 DirectoryId，无法加载第三层目录内容。";
                return;
            }

            int userPrivilege = 0x1; //  当前用户的权限等级

            QList<Table_Control_Data> tableControlDatas;
            bool allChangeFlag = false;
            m_sqlOper->GetThirdDirControlData(multiTableName, userPrivilege, tableControlDatas, allChangeFlag);
            displayThirdLevelFields(tableControlDatas, allChangeFlag, false);   // 传递参数表示 Home 界面
            // 获取第三层目录的数据
            //m_sqlOper->GetThirdDirControlData();
            //QJsonObject data = fetchThirdLevelData(directoryId, userPrivilege);
            // 显示字段展示窗口
            //displayThirdLevelFields(data, false); // 传递参数表示非 Home 界面
        } else {
            // 父目录不是第三层目录，确保目录树和分隔线可见
            m_pTreeViewDown->show();
            for (auto separator : firstLevelSeparators) {
                if (separator)
                    separator->show();
            }
        }
        return;
    }

    //  如果不在第三层目录，则在目录树中返回上一层
    qDebug() << "当前不在第三层目录，尝试在目录树中返回上一层。";

    QModelIndex currentIndex = m_pTreeViewDown->currentIndex();
    if (!currentIndex.isValid()) {
        qWarning() << "当前没有选中的目录项，无法返回。";
        return;
    }

    QStandardItem* currentItem = m_pCModel->itemFromIndex(currentIndex);
    if (!currentItem) {
        qWarning() << "当前选中的目录项无效。";
        return;
    }

    QStandardItem* parentItem = currentItem->parent();
    if (!parentItem) {
        qDebug() << "当前已经在根目录，无法返回。";
        return;
    }

    QModelIndex parentIndex = m_pCModel->indexFromItem(parentItem);
    if (!parentIndex.isValid()) {
        qWarning() << "父目录的 QModelIndex 无效。";
        return;
    }

    // 选中父目录项
    m_pTreeViewDown->setCurrentIndex(parentIndex);
    m_pTreeViewDown->scrollTo(parentIndex);

    // 更新导航栏
    updateNavigationBar(parentIndex);

    // 检查父目录是否为第三层目录
    QVariant dataVar = parentItem->data(Qt::UserRole + 2);
    bool isThirdLevel = false;
    int directoryId = -1;
    QString multiTableName = "";
    if (dataVar.canConvert<QJsonObject>()) {
        QJsonObject dataObj = dataVar.toJsonObject();
        if (dataObj.contains("IsThirdLevel") && dataObj["IsThirdLevel"].toBool()) {
            isThirdLevel = true;
            if (dataObj.contains("Id")) {
                directoryId = dataObj["Id"].toInt();
            }
            if (dataObj.contains("TableName"))
            {
                multiTableName = dataObj["TableName"].toString();
            }
        }
    }

    if (isThirdLevel) {
        if (directoryId == -1) {
            qWarning() << "无效的 DirectoryId，无法加载第三层目录内容。";
            return;
        }

        int userPrivilege = 0x1; // 根据实际情况获取当前用户的权限等级
        QList<Table_Control_Data> tableControlDatas;
        bool allChangeFlag = false;
        m_sqlOper->GetThirdDirControlData(multiTableName, userPrivilege, tableControlDatas, allChangeFlag);
        displayThirdLevelFields(tableControlDatas, allChangeFlag, false);   // 传递参数表示 Home 界面
        //QJsonObject data = fetchThirdLevelData(directoryId, userPrivilege);
        //displayThirdLevelFields(data, false); // 传递参数表示非 Home 界面
    }
}


QList<QStandardItem*> DbTreeViewManager::collectAllThirdLevelItems()
{
    QList<QStandardItem*> result;
    // 从根节点开始递归搜集
    QStandardItem *root = m_pCModel->invisibleRootItem();
    if (!root) return result;

    std::function<void(QStandardItem*)> dfsCollectThirdLevel;
    dfsCollectThirdLevel = [&](QStandardItem* parentItem)
    {
        if (!parentItem) return;
        int rowCount = parentItem->rowCount();
        for (int i = 0; i < rowCount; ++i) {
            QStandardItem *child = parentItem->child(i);
            if (!child) continue;

            // 判断是否是第三层
            QVariant dataVar = child->data(Qt::UserRole + 2);
            if (dataVar.canConvert<QJsonObject>()) {
                QJsonObject obj = dataVar.toJsonObject();
                if (obj.contains("IsThirdLevel") && obj["IsThirdLevel"].toBool()) {
                    // 收集这个第三层节点
                    result.append(child);
                }
            }
            // 即使不是第三层，也要继续往下找子节点
            dfsCollectThirdLevel(child);
        }
    };

    dfsCollectThirdLevel(root);
    return result;
}


void DbTreeViewManager::onButtonDownClicked()
{
    // 1) 收集所有 第三层 节点
    QList<QStandardItem*> thirdLevelList = collectAllThirdLevelItems();
    if (thirdLevelList.isEmpty()) {
        qDebug() << "[onButtonDownClicked] 没有任何三级目录，无法遍历。";
        return;
    }

    // 2) 找到  当前选中的节点 在 thirdLevelList 里的索引
    QModelIndex curIndex = m_pTreeViewDown->currentIndex();
    if (!curIndex.isValid()) {
        qDebug() << "[onButtonDownClicked] 当前没有选中节点，默认跳到第一个三级目录。";
        // 如果想默认跳到第一个
        QStandardItem *firstItem = thirdLevelList.first();
        QModelIndex idx = m_pCModel->indexFromItem(firstItem);
        m_pTreeViewDown->setCurrentIndex(idx);
        // 模拟点击一下
        onTreeViewClicked_updown(idx);
        // 保存复选框状态
        saveCheckedPaths();
        // 保存展开路径
        saveExpandedPaths();
        return;
    }

    QStandardItem *curItem = m_pCModel->itemFromIndex(curIndex);
    if (!curItem) {
        qWarning() << "[onButtonDownClicked] currentItem 无效。";
        return;
    }

    // 若不是三级目录，就先找它最近的父级是不是三级目录，否则当做没找到。
    int currentPos = -1;
    {
        // 在 thirdLevelList 里找到 curItem
        currentPos = thirdLevelList.indexOf(curItem);
        if (currentPos < 0) {
            qDebug() << "[onButtonDownClicked] 当前节点不是三级目录，尝试找父级是不是三级目录…";
            // 向上找父节点是否在 thirdLevelList 里
            QStandardItem *temp = curItem->parent();
            while (temp) {
                int pos = thirdLevelList.indexOf(temp);
                if (pos >= 0) {
                    currentPos = pos;
                    break;
                }
                temp = temp->parent();
            }
            if (currentPos < 0) {
                qDebug() << "还是找不到，说明当前目录不属于任何三级目录，直接跳到第一个";
                QStandardItem *firstItem = thirdLevelList.first();
                QModelIndex idx = m_pCModel->indexFromItem(firstItem);
                m_pTreeViewDown->setCurrentIndex(idx);
                onTreeViewClicked_updown(idx);
                // 保存复选框状态
                saveCheckedPaths();
                // 保存展开路径
                saveExpandedPaths();
                return;
            }
        }
    }

    //  尝试下一个
    int nextPos = currentPos + 1;
    if (nextPos >= thirdLevelList.size()) {
        qDebug() << "[onButtonDownClicked] 已经是最后一个三级目录了，无法再向下。";
        return;
    }

    //  跳到下一个
    QStandardItem *nextItem = thirdLevelList[nextPos];
    QModelIndex nextIndex = m_pCModel->indexFromItem(nextItem);
    m_pTreeViewDown->setCurrentIndex(nextIndex);
    // 相当于模拟点击
    onTreeViewClicked_updown(nextIndex);
    // 保存复选框状态
    saveCheckedPaths();
    // 保存展开路径
    saveExpandedPaths();
}

void DbTreeViewManager::onButtonUpClicked()
{
    // 1) 收集所有 第三层 节点
    QList<QStandardItem*> thirdLevelList = collectAllThirdLevelItems();
    if (thirdLevelList.isEmpty()) {
        qDebug() << "[onButtonUpClicked] 没有任何三级目录，无法遍历。";
        return;
    }

    // 2) 找到 当前选中的节点
    QModelIndex curIndex = m_pTreeViewDown->currentIndex();
    if (!curIndex.isValid()) {
        qDebug() << "[onButtonUpClicked] 当前无选中节点，默认跳到最后一个三级目录。";
        //  跳到最后一个
        QStandardItem *lastItem = thirdLevelList.last();
        QModelIndex idx = m_pCModel->indexFromItem(lastItem);
        m_pTreeViewDown->setCurrentIndex(idx);
        // 模拟点击
        onTreeViewClicked_updown(idx);
        // 保存复选框状态
        saveCheckedPaths();
        // 保存展开路径
        saveExpandedPaths();
        return;
    }

    QStandardItem *curItem = m_pCModel->itemFromIndex(curIndex);
    if (!curItem) {
        qWarning() << "[onButtonUpClicked] currentItem 无效。";
        return;
    }

    //  如果当前节点不是三级目录， 向上查找
    int currentPos = thirdLevelList.indexOf(curItem);
    if (currentPos < 0) {
        qDebug() << "[onButtonUpClicked] 当前节点不是三级目录，尝试找父级是不是三级目录。";
        QStandardItem *temp = curItem->parent();
        while (temp) {
            int pos = thirdLevelList.indexOf(temp);
            if (pos >= 0) {
                currentPos = pos;
                break;
            }
            temp = temp->parent();
        }
        if (currentPos < 0) {
            qDebug() << "找不到任何三级目录，直接跳到最后一个。";
            QStandardItem *lastItem = thirdLevelList.last();
            QModelIndex idx = m_pCModel->indexFromItem(lastItem);
            m_pTreeViewDown->setCurrentIndex(idx);
            onTreeViewClicked_updown(idx);
            // 保存复选框状态
            saveCheckedPaths();
            // 保存展开路径
            saveExpandedPaths();
            return;
        }
    }

    //  尝试上一个
    int prevPos = currentPos - 1;
    if (prevPos < 0) {
        qDebug() << "[onButtonUpClicked] 已经是第一个三级目录了，无法再向上。";
        return;
    }

    // 跳到上一个
    QStandardItem *prevItem = thirdLevelList[prevPos];
    QModelIndex prevIndex = m_pCModel->indexFromItem(prevItem);
    m_pTreeViewDown->setCurrentIndex(prevIndex);
    // 模拟点击
    onTreeViewClicked_updown(prevIndex);
    // 保存复选框状态
    saveCheckedPaths();
    // 保存展开路径
    saveExpandedPaths();
}


void DbTreeViewManager::onButtonRightClicked()
{

    if (m_forwardStack.isEmpty()) {
        qDebug() << "[Forward] 已经没有可以前进的页面";
        buttonRight->setIcon(QIcon(":/images/home_right.png"));
        return;
    }

    // 1. 弹出 forwardStack 的最后一个
    PageState st = m_forwardStack.takeLast();

    // 2. 把当前页面 push 到 backStack
    PageState cur = getCurrentPageState();
    m_backStack.append(cur);
    if(m_backStack.size() >= 2){
        buttonLeft->setIcon(QIcon(":/images/home_left.png"));
    }

    // 3. 加载 st
    loadPageState(st, true);
}

void DbTreeViewManager::onButtonLeftClicked()
{

    if (m_backStack.size() < 2) {
        qDebug() << "[Back] 已经无法再后退";
        buttonLeft->setIcon(QIcon(":/images/home_left_hide.png"));
        return;
    }

    // 1. 先把当前页面（相当于 m_backStack 最后一个）弹出，放到 forwardStack
    PageState cur = m_backStack.takeLast();
    if(m_backStack.size() >= 2){
        buttonLeft->setIcon(QIcon(":/images/home_left.png"));
    }else{
       buttonLeft->setIcon(QIcon(":/images/home_left_hide.png"));
    }
    m_forwardStack.append(cur);
    buttonRight->setIcon(QIcon(":/images/home_right_show.png"));

    // 2. 拿到新的 m_backStack 末尾（即上一次看的页面）
    const PageState &prev = m_backStack.last();

    // 3. 加载 prev
    loadPageState(prev, true  );
}


// 构建节点的完整路径
QStringList DbTreeViewManager::buildItemPath(QStandardItem *item)
{
    QStringList path;
    QStandardItem *currentItem = item;
    while (currentItem) {
        path.prepend(currentItem->text());
        currentItem = currentItem->parent();
    }
    return path;
}

// 根据路径查找对应的节点
QModelIndex DbTreeViewManager::findItemByPath(const QStringList &path)
{
    if (path.isEmpty()) return QModelIndex();

    QStandardItem *currentItem = m_pCModel->invisibleRootItem();
    QModelIndex currentIndex;

    for (const QString &part : path) {
        bool found = false;
        for (int i = 0; i < currentItem->rowCount(); ++i) {
            QStandardItem *child = currentItem->child(i);
            if (child == nullptr)
            {
                qDebug() << "child is nullptr";
            }
            if (child->text() == part) {
                currentIndex = m_pCModel->indexFromItem(child);
                currentItem = child;
                found = true;
                qDebug() << "找到路径部分：" << part;
                break;
            }
        }
        if (!found) {
            qWarning() << "路径部分未找到：" << part;
            return QModelIndex();
        }
    }
    return currentIndex;
}




void DbTreeViewManager::setCheckedPaths(const QStringList &checkedPathsList)
{
    m_blockItemChanged = true;

    for (const QString &pathStr : checkedPathsList) {
        QStringList path = pathStr.split("/");
        QModelIndex idx = findItemByPath(path);
        if (idx.isValid()) {
            QStandardItem *item = m_pCModel->itemFromIndex(idx);
            if (item) {
                item->setCheckState(Qt::Checked);
                qDebug() << " Setting item:" << item->text() << "to Checked";
            }
        } else {
            qDebug() << "Path not found:" << pathStr;
        }
    }

    m_blockItemChanged = false;
}



// 递归收集被选中的路径
QStringList DbTreeViewManager::collectCheckedPathsRecursive(QStandardItem *item, QStringList path)
{
    QStringList checkedList;
    if (!item) {
        item = m_pCModel->invisibleRootItem();
    }

    for (int i = 0; i < item->rowCount(); ++i) {
        QStandardItem *child = item->child(i);
        if (child) {
            QStringList currentPath = path;
            currentPath << child->text();

            if (child->checkState() == Qt::Checked) {
                checkedList << currentPath.join("/");
            }

            // 递归收集子项
            checkedList << collectCheckedPathsRecursive(child, currentPath);
        }
    }

    return checkedList;
}

// 收集所有被选中的复选框路径
QStringList DbTreeViewManager::collectCheckedPaths()
{
    return collectCheckedPathsRecursive(m_pCModel->invisibleRootItem(), QStringList());
}



// 更新父项的复选框状态
void DbTreeViewManager::updateParentItems(QStandardItem *parentItem)
{
    if (!parentItem)
        return;

    int checkedCount = 0;
    int totalCount = parentItem->rowCount();
    qDebug() << "Updating child items of:" << parentItem->text();

    for (int i = 0; i < totalCount; ++i)
    {
        QStandardItem *child = parentItem->child(i);
        if (child && child->checkState() == Qt::Checked)
        {
            checkedCount++;
        }
    }

    if (checkedCount == totalCount)
    {
        parentItem->setCheckState(Qt::Checked);
    }
    else
    {
        parentItem->setCheckState(Qt::Unchecked);
    }

    // 递归更新上层父项
    updateParentItems(parentItem->parent());
}

// 加载并显示三级目录对应按钮配置信息
//void DbTreeViewManager::loadButtonConfigForThirdLevel(const QJsonObject &thirdLevelObj)
//{
//    if (!m_originalWnd) {
//        qWarning() << "OriginalWnd 指针为空，无法加载按钮配置";
//        return;
//    }
//
//    if (!thirdLevelObj.contains("buttons")) {
//        qWarning() << "三级目录配置中不包含 'buttons' 字段";
//        return;
//    }
//
//    QJsonArray buttonsArray = thirdLevelObj.value("buttons").toArray();
//
//    // 获取 widget_left
//    QWidget* widgetLeft = m_originalWnd->getWidgetLeft();
//    if (!widgetLeft) {
//        qWarning() << "无法访问 widget_left";
//        return;
//    }
//
//    // 清空 widget_left 中由 loadButtonConfigForThirdLevel 创建的按钮
//    QList<QPushButton*> existingButtons = widgetLeft->findChildren<QPushButton*>();
//    for (QPushButton* button : existingButtons) {
//        if (button->objectName().startsWith("thirdLevelBtn_")) {   // 仅删除特定按钮
//            button->deleteLater();
//        }
//    }
//
//    // 使用绝对定位创建按钮
//    for (int i = 0; i < buttonsArray.size() && i < 12; ++i) {
//        QJsonObject buttonObj = buttonsArray[i].toObject();
//        QString buttonId = buttonObj.value("id").toString();
//        QString buttonIcon = buttonObj.value("icon").toString();
//        QString buttonText = buttonObj.value("text").toString();
//        bool isEnabled = buttonObj.value("enabled").toBool();
//
//        // 创建按钮
//        QPushButton *button = new QPushButton(widgetLeft);
//        button->setObjectName("thirdLevelBtn_" + buttonId); // 设置带前缀的对象名称
//        connect(button, &QPushButton::clicked, this, []() {
//            JMessageTip::Message_question("Q111");
//            });
//
//        // 设置按钮的样式，调整图标和文本的位置
//        button->setStyleSheet(R"(
//            QPushButton {
//                position: absolute;
//                border-radius: 6px;
//                opacity: 1;
//                background: #CBD0FF;
//                border: none;
//            }
//            QPushButton:hover {
//                background-color: #A9B4FF; /* 鼠标悬停效果 */
//            }
//        )");
//
//        // 设置按钮的位置和大小
//        int x = 16;
//        int y = 245 + i * (48 + 13); // 第一个按钮 y=245，后续每个按钮间隔13px
//        button->setGeometry(x, y, 158, 48);
//
//        // 设置按钮的可见性，根据 "enabled" 字段显示或隐藏按钮
//        button->setVisible(isEnabled);
//
//        // 创建图标标签
//        QLabel *iconLabel = new QLabel(button);
//        iconLabel->setPixmap(QIcon(buttonIcon).pixmap(16, 16));
//        iconLabel->setGeometry(10, 16, 16, 16); // 图标距离左边10px，顶部16px
//        iconLabel->setFixedSize(16, 16);
//        iconLabel->setStyleSheet("background-color: transparent;");
//        iconLabel->setVisible(isEnabled); // 根据按钮的可见性设置图标的可见性
//
//        // 创建文本标签
//        QLabel *textLabel = new QLabel(buttonText, button);
//        textLabel->setGeometry(34, 0, 90, 48);  // 文本距离左边34px
//        textLabel->setWordWrap(true);  // 允许换行
//        textLabel->setAlignment(Qt::AlignLeft | Qt::AlignVCenter);
//        textLabel->setStyleSheet(R"(
//            QLabel {
//                background: transparent;
//                font-family: "思源黑体";
//                font-size: 14px;
//                font-weight: 500;
//                color: #4E51CE;
//            }
//        )");
//
//        textLabel->setVisible(isEnabled); // 根据按钮的可见性设置文本的可见性
//
//        // 创建 F1-F12 标签
//        QString fLabelText = QString("F%1").arg(i + 1);  // F1, F2, ..., F12
//        QLabel *fLabel = new QLabel(fLabelText, button);
//        fLabel->setFixedSize(21, 16);   // 设置大小为21x16
//        fLabel->setAlignment(Qt::AlignCenter);
//        fLabel->setStyleSheet(R"(
//            QLabel {
//                background-color: transparent;
//                color: #2A7ED8;
//                font-size: 12px;
//                font-weight: bold;
//            }
//        )");
//
//        // 设置标签的位置
//        int fX = 134;
//        int fY = 2;
//        fLabel->setGeometry(fX, fY, 14, 16);
//        fLabel->setVisible(isEnabled);   // 根据按钮的可见性设置标签的可见性
//
//        // 将按钮、图标、文本和标签添加到控件列表
//        m_fieldWidgets.append(button);
//        m_fieldWidgets.append(iconLabel);
//        m_fieldWidgets.append(textLabel);
//        m_fieldWidgets.append(fLabel);
//    }
//}

void DbTreeViewManager::displayThirdLevelButtons(const QList<CONFIG_BASE_STRUCT>& buttons)
{
    if (!m_originalWnd)
    {
        qWarning() << "OriginalWnd 指针为空，无法加载按钮配置";
        return;
    }

    // 获取 widget_left
    QWidget* widgetLeft = m_originalWnd->getWidgetLeft();
    if (!widgetLeft)
    {
        qWarning() << "无法访问 widget_left";
        return;
    }

    // 清空 widget_left 中由 loadButtonConfigForThirdLevel 创建的按钮
    QList<QPushButton*> existingButtons = widgetLeft->findChildren<QPushButton*>();
    for (QPushButton* button : existingButtons)
    {
        QString objName = button->objectName();
        if (button->objectName().startsWith("thirdLevelBtn_F"))
        {   // 仅删除特定按钮
            button->deleteLater();
        }
    }

    // 使用绝对定位创建按钮
    for (int i = 0; i < buttons.size() && i < 12; ++i)
    {
        int buttonId = buttons[i].iGroupId;
        QString buttonIcon = QString::fromStdString(buttons[i].sIcon);
        QString buttonText = QString::fromStdString(buttons[i].strName);
        QString strCallFun = QString::fromStdString(buttons[i].strCallFun);
        bool isEnabled = buttons[i].bEnable;

    //for (int i = 0; i < buttonsArray.size() && i < 12; ++i) {
        //QJsonObject buttonObj = buttonsArray[i].toObject();
        //QString buttonId = buttonObj.value("id").toString();
        //QString strNumID = buttonId; // 不改变原来的意思
        //strNumID.remove('F');
        //QString strDirectoryId = buttonObj.value("DirectoryId").toString();
        //QString buttonIcon = buttonObj.value("icon").toString();
        //QString buttonText = buttonObj.value("text").toString();
        //QString strCallFun = buttonObj.value("CallFun").toString();
        //bool isEnabled = buttonObj.value("enabled").toBool();

        // 创建按钮
        QPushButton *button = new QPushButton(widgetLeft);
        QString ObjectName = "thirdLevelBtn_F" + QString::number(buttonId);
        button->setObjectName(ObjectName); // 设置带前缀的对象名称
        ObjectName = button->objectName();
        connect(button, &QPushButton::clicked, this, [&, strCallFun, buttonId]()
            {
                ns_module::ST_BUTTON_FUN callFun = {};
                //callFun.DirectoryId = strDirectoryId.toInt();
                callFun.strCallFun = strCallFun.toStdString();
                callFun.nId = buttonId;
                emit RunFunSignals(callFun);
            });

        // 设置按钮的样式，调整图标和文本的位置
        button->setStyleSheet(R"(
            QPushButton {
                position: absolute;
                border-radius: 6px;
                opacity: 1;
                background: #CBD0FF;
                border: none;
            }
            QPushButton:hover {
                background-color: #A9B4FF; /* 鼠标悬停效果 */
            }
        )");

        if (buttonId > 12)
        {
            qWarning() << "buttonId 超过最大ID";
            continue;
        }

        // 设置按钮的位置和大小
        int x = 16;
        int y = 245 + (buttonId - 1) * (48 + 13); // 第一个按钮 y=245，后续每个按钮间隔13px
        button->setGeometry(x, y, 158, 48);

        // 设置按钮的可见性，根据 "enabled" 字段显示或隐藏按钮
        button->setVisible(isEnabled);

        // 创建图标标签
        QLabel* iconLabel = new QLabel(button);
        iconLabel->setPixmap(QIcon(buttonIcon).pixmap(16, 16));
        iconLabel->setGeometry(10, 16, 16, 16); // 图标距离左边10px，顶部16px
        iconLabel->setFixedSize(16, 16);
        iconLabel->setStyleSheet("background-color: transparent;");
        iconLabel->setVisible(isEnabled); // 根据按钮的可见性设置图标的可见性

        // 创建文本标签
        QLabel* textLabel = new QLabel(buttonText, button);
        textLabel->setGeometry(34, 0, 90, 48);  // 文本距离左边34px
        textLabel->setWordWrap(true);  // 允许换行
        textLabel->setAlignment(Qt::AlignLeft | Qt::AlignVCenter);
        textLabel->setStyleSheet(R"(
            QLabel {
                background: transparent;
                font-family: "思源黑体";
                font-size: 14px;
                font-weight: 500;
                color: #4E51CE;
            }
        )");

        textLabel->setVisible(isEnabled); // 根据按钮的可见性设置文本的可见性

        // 创建 F1-F12 标签
        QString fLabelText = QString("F%1").arg(buttonId);  // F1, F2, ..., F12
        QLabel* fLabel = new QLabel(fLabelText, button);
        fLabel->setFixedSize(21, 16);   // 设置大小为21x16
        fLabel->setAlignment(Qt::AlignCenter);
        fLabel->setStyleSheet(R"(
            QLabel {
                background-color: transparent;
                color: #2A7ED8;
                font-size: 12px;
                font-weight: bold;
            }
        )");

        // 设置标签的位置
        int fX = 134;
        int fY = 2;
        fLabel->setGeometry(fX, fY, 14, 16);
        fLabel->setVisible(isEnabled);   // 根据按钮的可见性设置标签的可见性

        // 将按钮、图标、文本和标签添加到控件列表
        m_fieldWidgets.append(button);
        m_fieldWidgets.append(iconLabel);
        m_fieldWidgets.append(textLabel);
        m_fieldWidgets.append(fLabel);
    }


}


// 清理并隐藏三级目录菜单内容
void DbTreeViewManager::clearThirdLevelMenu()
{
    // 遍历所有子控件，找到标题为 "字段展示" 的窗口并关闭
    foreach (QObject *child, m_pOriginalWndMenuPage->children()) {
        QWidget *childWidget = qobject_cast<QWidget*>(child);
        if (childWidget && childWidget->windowTitle() == "字段展示") {
            qDebug() << "关闭现有的字段展示窗口";
            childWidget->close();
        }
    }

    // 显示主目录树和分隔线
    m_pTreeViewDown->show();
    for (auto separator : firstLevelSeparators) {
        separator->show();
    }
}


// 保存选中路径
void DbTreeViewManager::saveCheckedPaths()
{
    if (m_currentConfigName == "") {
        qWarning() << "当前配置ID无效，无法保存复选框状态。";
        return;
    }

    QSettings settings("RunCloudTech", "David");
    //QString configKey = QString::number(m_currentConfigId);

    settings.beginGroup("TreeViewCheckedState");

    // 保存选中路径
    QString keyChecked = QString("checkedPaths/%1").arg(m_currentConfigName);
    QStringList checkedList = collectCheckedPaths();
    settings.setValue(keyChecked, checkedList);

    settings.endGroup();

    qDebug() << "保存复选框状态路径：" << checkedList;
}

// 加载选中路径
void DbTreeViewManager::loadCheckedPaths()
{
    if (m_currentConfigName == "") {
        qWarning() << "当前配置ID无效，无法加载复选框状态。";
        return;
    }

    QSettings settings("RunCloudTech", "David");
    //QString configKey = QString::number(m_currentConfigId);

    settings.beginGroup("TreeViewCheckedState");

    // 读取选中路径
    QString keyChecked = QString("checkedPaths/%1").arg(m_currentConfigName);
    QStringList loadedChecked = settings.value(keyChecked).toStringList();

    settings.endGroup();

    qDebug() << "加载复选框状态路径：" << loadedChecked;

    m_blockItemChanged = true;

    setCheckedPaths(loadedChecked);

    m_blockItemChanged = false;

    // 更新导航栏
    if (!loadedChecked.isEmpty()) {
        QString lastPathStr = loadedChecked.last();
        QStringList lastPath = lastPathStr.split("/");
        QModelIndex lastIdx  = findItemByPath(lastPath);
        if (lastIdx.isValid()) {
            m_pTreeViewDown->setCurrentIndex(lastIdx);
            updateNavigationBar(lastIdx);
        }
    } else {
        // 如果没有加载到任何路径，自动选择第一个目录
        QStandardItem *rootItem = m_pCModel->invisibleRootItem();
        if (rootItem->rowCount() > 0) {
            QModelIndex firstIndex = m_pCModel->index(0, 0, QModelIndex());
            if (firstIndex.isValid()) {
                m_pTreeViewDown->setCurrentIndex(firstIndex);
                m_pTreeViewDown->expand(firstIndex); // 展开第一个目录

                QStandardItem *firstItem = m_pCModel->itemFromIndex(firstIndex);
                QVariant data = firstItem->data(Qt::UserRole + 2);
                if (data.canConvert<QJsonObject>()) {
                    QJsonObject thirdLevelObj = data.toJsonObject();
                    if (thirdLevelObj.contains("IsThirdLevel") && thirdLevelObj["IsThirdLevel"].toBool()) {
                        QString multiTableName = "";
                        if (thirdLevelObj.contains("TableName")) {
                            multiTableName = thirdLevelObj["TableName"].toString();
                        }
                        QList<CONFIG_BASE_STRUCT> buttons;
                        int userGrade = 0x1;
                        m_sqlOper->GetThirdDirButtons(multiTableName, userGrade, buttons);
                        displayThirdLevelButtons(buttons);

                        //loadButtonConfigForThirdLevel(thirdLevelObj);
                    }
                }
            }
        }
    }
}

// 保存展开路径
void DbTreeViewManager::saveExpandedPaths()
{
    if (m_currentConfigName == "") {
        qWarning() << "当前配置ID无效，无法保存展开路径。";
        return;
    }

    QSettings settings("RunCloudTech", "David");
    //QString configKey = QString::number(m_currentConfigId);

    settings.beginGroup("TreeViewExpandedState");

    // 保存展开路径
    QString keyExpanded = QString("expandedPaths/%1").arg(m_currentConfigName);
    QStringList expandedList = QStringList(expandedPaths.begin(), expandedPaths.end());
    settings.setValue(keyExpanded, expandedList);

    settings.endGroup();

    qDebug() << "保存展开路径：" << expandedList;
}

// 加载展开路径
void DbTreeViewManager::loadExpandedPaths()
{
    if (m_currentConfigName == "") {
        qWarning() << "当前配置ID无效，无法加载展开路径。";
        return;
    }

    QSettings settings("RunCloudTech", "David");
    //QString configKey = QString::number(m_currentConfigId);

    settings.beginGroup("TreeViewExpandedState");

    // 读取展开路径
    QString keyExpanded = QString("expandedPaths/%1").arg(m_currentConfigName);
    QStringList loadedExpanded = settings.value(keyExpanded).toStringList();

    settings.endGroup();

    qDebug() << "加载展开路径：" << loadedExpanded;

    m_blockItemChanged = true;

    // 恢复展开路径
    for (const QString &p : loadedExpanded) {
        QStringList path = p.split("/");
        QModelIndex idx = findItemByPath(path);
        if (idx.isValid()) {
            m_pTreeViewDown->expand(idx);
            expandedPaths.insert(p);
            qDebug() << "成功恢复展开路径：" << p;
        } else {
            qDebug() << "未找到展开路径部分： " << p;
        }
    }

    m_blockItemChanged = false;
}


// 清空历史
void DbTreeViewManager::clearHistory()
{
    m_backStack.clear();
    m_forwardStack.clear();
    buttonLeft->setIcon(QIcon(":/images/home_left_hide.png"));
    buttonRight->setIcon(QIcon(":/images/home_right.png"));
}

// 获取当前页面的 PageState
DbTreeViewManager::PageState DbTreeViewManager::getCurrentPageState()
{
    PageState st;
    st.isThirdLevel = false;
    st.directoryId = -1;

    // 判断是否在第三层窗口中
    if (m_thirdLevelFieldWnd && m_thirdLevelFieldWnd->isVisible()) {
        // 如果此时是在第三层界面，则用当前导航栏 or 目录树的 “选中项” 来获取路径
        QModelIndex curIndex = m_pTreeViewDown->currentIndex();
        if (!curIndex.isValid()) {

            st.path << "未知目录";
        } else {
            QStandardItem* item = m_pCModel->itemFromIndex(curIndex);
            st.path = buildItemPath(item);
        }

        // 如果能拿到 DirectoryId，则置为第三层
        QVariant dataVar = m_pCModel->itemFromIndex(m_pTreeViewDown->currentIndex())->data(Qt::UserRole + 2);
        if (dataVar.canConvert<QJsonObject>()) {
            QJsonObject obj = dataVar.toJsonObject();
            if (obj.contains("IsThirdLevel") && obj["IsThirdLevel"].toBool()) {
                st.isThirdLevel = true;
                st.directoryId = obj.value("Id").toInt(-1);
                st.multiTableName = obj.value("TableName").toString();
            }
        }
    }
    else {
        // 当前是目录树界面，就看 treeView 选中项
        QModelIndex curIndex = m_pTreeViewDown->currentIndex();
        if (curIndex.isValid()) {
            QStandardItem* item = m_pCModel->itemFromIndex(curIndex);
            st.path = buildItemPath(item);

            // 检查是否第三层
            QVariant dataVar = item->data(Qt::UserRole + 2);
            if (dataVar.canConvert<QJsonObject>()) {
                QJsonObject obj = dataVar.toJsonObject();
                if (obj.contains("IsThirdLevel") && obj["IsThirdLevel"].toBool()) {
                    st.isThirdLevel = true;
                    st.directoryId = obj.value("Id").toInt(-1);
                    st.multiTableName = obj.value("TableName").toString();
                }
            }
        }
    }
    return st;
}


//加载指定的 PageState：相当于“回到该路径”或“跳转到这个第三层”

void DbTreeViewManager::loadPageState(const PageState &st, bool isByHistoryNav)
{
    // 先根据 st.path 找到对应的节点
    QModelIndex idx = findItemByPath(st.path);
    if (!idx.isValid()) {
        qWarning() << "[loadPageState] 未找到路径" << st.path;
        return;
    }

    // 选中该节点
    m_pTreeViewDown->setCurrentIndex(idx);
    m_pTreeViewDown->scrollTo(idx);

    // 更新导航栏
    updateNavigationBar(idx);

    // 如果是第三层，就加载对应的数据窗口
    if (st.isThirdLevel && st.directoryId != -1) {
        // 如果当前已在一个第三层窗口，先关闭它
        if (m_thirdLevelFieldWnd) {
            m_thirdLevelFieldWnd->close();
            m_thirdLevelFieldWnd->deleteLater();
            m_thirdLevelFieldWnd = nullptr;
        }

        int userPrivilege = 0x1;
        QList<Table_Control_Data> tableControlDatas;
        bool allChangeFlag = false;
        m_sqlOper->GetThirdDirControlData(st.multiTableName, userPrivilege, tableControlDatas, allChangeFlag);
        displayThirdLevelFields(tableControlDatas, allChangeFlag, false);   // 传递参数表示 Home 界面
        //QJsonObject data = fetchThirdLevelData(st.directoryId, userPrivilege);
        //displayThirdLevelFields(data, (m_currentConfigName == "Home"));
    } else {
        // 否则，显示目录树
        if (m_thirdLevelFieldWnd) {
            m_thirdLevelFieldWnd->close();
            m_thirdLevelFieldWnd->deleteLater();
            m_thirdLevelFieldWnd = nullptr;
        }
        m_pTreeViewDown->show();
        for (auto sep : firstLevelSeparators) {
            if (sep) sep->show();
        }
    }

    if (!isByHistoryNav) {
        m_forwardStack.clear();
        buttonRight->setIcon(QIcon(":/images/home_right.png"));
        //   把新状态压入后退栈
        m_backStack.append(st);
        if(m_backStack.size() >= 2){
            buttonLeft->setIcon(QIcon(":/images/home_left.png"));
        }
    }
}
void DbTreeViewManager::loginput(const QString& fieldTableName, const QString& fieldName,const QString& modifies){
    // 获取当前时间并格式化
    QDateTime currentDateTime = QDateTime::currentDateTime();
    QString timestamp = currentDateTime.toString("yyyy-MM-dd hh:mm:ss");
    QString logMessage = QString("%1 :fieldTableName is %2 and fieldName is %3 ,currentvalue is modified %4" ).arg(timestamp).arg(fieldTableName).arg(fieldName).arg(modifies);
    QString pathoflog = "C:\\Users\\Administrator\\Desktop\\qt\\merge\\gujiangdong\\die-bonder-ui0218\\die-bonder-ui\\log/log.txt";
    writeLogToFile(logMessage,pathoflog);
}

void DbTreeViewManager::writeLogToFile(const QString& logMessage, const QString& filePath) {
    QFile logFile(filePath);

    if (!logFile.open(QIODevice::Append | QIODevice::Text)) {
        qWarning() << "Cannot open file for writing:" << filePath;
        return;
    }

    QTextStream out(&logFile);
    out << logMessage << "\n";
    logFile.close();
}